Komatsu ROLLER 796-627-1060 Spacer	Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; Volume Discount:Available; Bearing I.D. d(mm):15; RoHS:6; Housing Material:1045 Carbon Steel; Type:Bearings with Housin;
Komatsu ROLLER NJ23102-K8470KF roller	rs min:1 mm; Dynamic load, C:12.7 kN; ra max:1 mm; Radial clearance class:C3; Da max:42 mm; Nlim:24,000 rpm; Characteristic inner ring frequency, BPFI:4.92 Hz; da max:27.5 mm; Fatigue limit load, Cu:0.3 kN; d1:27.5 mm;
Komatsu ROLLER X252511121 roller	G:R1/8"; S:15.9 mm; Designation of housing:FE206-; J:82.5 mm; Recommended tightening torque for set screw:5.5 Nm; e:20 mm; C:19.5 kN; C0:11.2 kN; L:108 mm; Designation of bearing:UC206G2;
Komatsu ROLLER 8248-75-2971 ROLLER	Oil Lubrication - M/N Seal:700 rpm; Dimension C:6.88 in; Grease Lubrication - M/N Seal:700 rpm; Locking Style:Single V-Lock; Dimension H:1.50 in; Shaft Tolerance:0.0050 in; Grease Lubrication - T Seal:1000 rpm; Dimension D:11.190 in; Housing Style:Four-Bolt Square Fla; Dimension L Exp:6.38 in;
Komatsu ROLLER 707-40-28020 Spacer	e - ISO Factor8:0.41; B:66.675 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:34100 lbf; Da - Cup Frontface Backing Diameter:238.30 mm; Db - Cup Backface Backing Diameter:226.06 mm; B - Cone Width:71.438 mm; C0 - Static Radial Rating:211000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:132000 lbf; C - Cup Width:47.625 mm; Y - ISO Factor9:1.47;
Komatsu ROLLER 8242-62-2150 Spacer	Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; Volume Discount:Available; Bearing I.D. d(mm):15; RoHS:6; Housing Material:1045 Carbon Steel; Type:Bearings with Housin;
Komatsu ROLLER TN08681-30480 ROLLER	rs min:1 mm; Dynamic load, C:12.7 kN; ra max:1 mm; Radial clearance class:C3; Da max:42 mm; Nlim:24,000 rpm; Characteristic inner ring frequency, BPFI:4.92 Hz; da max:27.5 mm; Fatigue limit load, Cu:0.3 kN; d1:27.5 mm;
Komatsu ROLLER 21K-70-23150 Spacer	E:12.5 mm; Designation of bearing:US205G2T04; G:R1/8"; s1:13.5 mm; J:50.8 mm; d:25 mm; Designation of open end cover:SCO205-25; T min.:-40 °C; Designation of housing:PAE205N-; H:36.5 mm;