Komatsu ROLLER 6261-41-9590 roller	Housing Material:1045 Carbon Steel; Number of Bearings:Double; Days to Ship:7 Days; RoHS:6; Type:Bearings with Housin; Bearing Retained:No; Bearing Part Number:6002; Bearing Used:Deep Groove Ball Bea; Width T(mm):45;
Komatsu ROLLER 8295-75-2630 ROLLER	d:66.5000 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:102000 lbf; Aa - Cage-Cone Backface Clearance:-0.34 in; da - Cone Frontface Backing Diameter:67.32 in; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.71 in; Cage Type:Pin-Type; C90 - Dynamic Radial Rating (90 million revolutions)5:123000 lbf; C0 - Static Radial Rating:1990000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:473000 lbf;
Komatsu ROLLER 19M-30-11590 Spacer	Bearing Number:MSE304BR; Maximum Speed:2520 rpm; Dimension T:14.0 in; Dimension R:11.9 in; Ca - Axial Load Rating:4002 lbf; Dimension N:9.625 in; Dimension P:0.7 in; Series Type:Medium Series; Cor - Static Load Rating:79358 lbf; Dimension L:6.4 in;
Komatsu ROLLER SD1350-10801X9 roller	Mass:0.008 kg; Min operating temperature, Tmin:-45 °C; ra max:0.3 mm; Inventory:0.0; Category:Bearings; Manufacturer Name:NTN; D:19 mm; B:6 mm; Brand:NTN; Radial clearance class:CNL;
Komatsu ROLLER 3EE-27-21180SGKF Spacer	Housing Material:1045 Carbon Steel; Number of Bearings:Double; Days to Ship:7 Days; RoHS:6; Type:Bearings with Housin; Bearing Retained:No; Bearing Part Number:6002; Bearing Used:Deep Groove Ball Bea; Width T(mm):45;
Komatsu ROLLER 207-30-00871 ROLLER	G:R1/8"; S:15.9 mm; Designation of housing:FE206-; J:82.5 mm; Recommended tightening torque for set screw:5.5 Nm; e:20 mm; C:19.5 kN; C0:11.2 kN; L:108 mm; Designation of bearing:UC206G2;
Komatsu ROLLER 235-70-45270 Spacer	G:R1/8"; S:15.9 mm; Designation of housing:FE206-; J:82.5 mm; Recommended tightening torque for set screw:5.5 Nm; e:20 mm; C:19.5 kN; C0:11.2 kN; L:108 mm; Designation of bearing:UC206G2;
Komatsu ROLLER 791-627-1230 Spacer	G:R1/8"; S:15.9 mm; Designation of housing:FE206-; J:82.5 mm; Recommended tightening torque for set screw:5.5 Nm; e:20 mm; C:19.5 kN; C0:11.2 kN; L:108 mm; Designation of bearing:UC206G2;