Komatsu ROLLER 707-40-25870 Spacer	Oil Lubrication - M/N Seal:700 rpm; Dimension C:6.88 in; Grease Lubrication - M/N Seal:700 rpm; Locking Style:Single V-Lock; Dimension H:1.50 in; Shaft Tolerance:0.0050 in; Grease Lubrication - T Seal:1000 rpm; Dimension D:11.190 in; Housing Style:Four-Bolt Square Fla; Dimension L Exp:6.38 in;
Komatsu ROLLER 380-176352-1 Spacer	Bearing Number:MSE304BR; Maximum Speed:2520 rpm; Dimension T:14.0 in; Dimension R:11.9 in; Ca - Axial Load Rating:4002 lbf; Dimension N:9.625 in; Dimension P:0.7 in; Series Type:Medium Series; Cor - Static Load Rating:79358 lbf; Dimension L:6.4 in;
Komatsu ROLLER 15B-960-1670 Spacer	Mass:0.008 kg; Min operating temperature, Tmin:-45 °C; ra max:0.3 mm; Inventory:0.0; Category:Bearings; Manufacturer Name:NTN; D:19 mm; B:6 mm; Brand:NTN; Radial clearance class:CNL;
Komatsu ROLLER 707-40-26011 Spacer	E:12.5 mm; Designation of bearing:US205G2T04; G:R1/8"; s1:13.5 mm; J:50.8 mm; d:25 mm; Designation of open end cover:SCO205-25; T min.:-40 °C; Designation of housing:PAE205N-; H:36.5 mm;
Komatsu ROLLER 198-911-8550 Spacer	e - ISO Factor8:0.41; B:66.675 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:34100 lbf; Da - Cup Frontface Backing Diameter:238.30 mm; Db - Cup Backface Backing Diameter:226.06 mm; B - Cone Width:71.438 mm; C0 - Static Radial Rating:211000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:132000 lbf; C - Cup Width:47.625 mm; Y - ISO Factor9:1.47;
Komatsu ROLLER SD1361-04800X0 roller	Housing Material:1045 Carbon Steel; Number of Bearings:Double; Days to Ship:7 Days; RoHS:6; Type:Bearings with Housin; Bearing Retained:No; Bearing Part Number:6002; Bearing Used:Deep Groove Ball Bea; Width T(mm):45;
Komatsu ROLLER 23B-27-11170 Spacer	G:R1/8"; S:15.9 mm; Designation of housing:FE206-; J:82.5 mm; Recommended tightening torque for set screw:5.5 Nm; e:20 mm; C:19.5 kN; C0:11.2 kN; L:108 mm; Designation of bearing:UC206G2;
Komatsu ROLLER 417-43-31120 roller	G:R1/8"; S:15.9 mm; Designation of housing:FE206-; J:82.5 mm; Recommended tightening torque for set screw:5.5 Nm; e:20 mm; C:19.5 kN; C0:11.2 kN; L:108 mm; Designation of bearing:UC206G2;