Komatsu ROLLER KBC0213-31227KF roller	d:66.5000 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:102000 lbf; Aa - Cage-Cone Backface Clearance:-0.34 in; da - Cone Frontface Backing Diameter:67.32 in; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.71 in; Cage Type:Pin-Type; C90 - Dynamic Radial Rating (90 million revolutions)5:123000 lbf; C0 - Static Radial Rating:1990000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:473000 lbf;
Komatsu ROLLER 3BA-91-71192KF roller	E:12.5 mm; Designation of bearing:US205G2T04; G:R1/8"; s1:13.5 mm; J:50.8 mm; d:25 mm; Designation of open end cover:SCO205-25; T min.:-40 °C; Designation of housing:PAE205N-; H:36.5 mm;
Komatsu ROLLER 428-12-11220 Spacer	Mass:0.008 kg; Min operating temperature, Tmin:-45 °C; ra max:0.3 mm; Inventory:0.0; Category:Bearings; Manufacturer Name:NTN; D:19 mm; B:6 mm; Brand:NTN; Radial clearance class:CNL;
Komatsu ROLLER 37E-1CS-3020KF roller	Fit:J7; RoHS:6; Unit Body Material:Cast Iron; Surface Treatment:No; Days to Ship:Quote; Grease Type:Standard Grease; Bearing Unit, Type:Take-Up Type; Stroke:No; Basic Load Rating, Dynamic Rating(N):57200;
Komatsu ROLLER 207-26-54251 Spacer	e - ISO Factor8:0.41; B:66.675 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:34100 lbf; Da - Cup Frontface Backing Diameter:238.30 mm; Db - Cup Backface Backing Diameter:226.06 mm; B - Cone Width:71.438 mm; C0 - Static Radial Rating:211000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:132000 lbf; C - Cup Width:47.625 mm; Y - ISO Factor9:1.47;
Komatsu ROLLER 6553-31-2100 roller	G:R1/8"; S:15.9 mm; Designation of housing:FE206-; J:82.5 mm; Recommended tightening torque for set screw:5.5 Nm; e:20 mm; C:19.5 kN; C0:11.2 kN; L:108 mm; Designation of bearing:UC206G2;
Komatsu ROLLER 6262-11-3200 roller	G:R1/8"; S:15.9 mm; Designation of housing:FE206-; J:82.5 mm; Recommended tightening torque for set screw:5.5 Nm; e:20 mm; C:19.5 kN; C0:11.2 kN; L:108 mm; Designation of bearing:UC206G2;
Komatsu ROLLER DK134147-0320 roller	rs min:1 mm; Dynamic load, C:12.7 kN; ra max:1 mm; Radial clearance class:C3; Da max:42 mm; Nlim:24,000 rpm; Characteristic inner ring frequency, BPFI:4.92 Hz; da max:27.5 mm; Fatigue limit load, Cu:0.3 kN; d1:27.5 mm;