Komatsu TEE "	Characteristic inner ring frequency, BPFI:7.91 Hz; d:110 mm; Characteristic outer ring frequency, BPF0:6.09 Hz; da max:126 mm; f0:15.6; Radial clearance class:CM; da min:119 mm; Max operating temperature, Tmax:110 °C; Da max:161 mm; Fatigue limit load, Cu:2.8 kN;
Komatsu TEE "2A5-60-11231 Ball seat	Bearing number:9104P; Size (mm):20x42x12; Bore Diameter (mm):20; Outer Diameter (mm):42; Width (mm):12; d:20 mm; D:42 mm; B:12 mm; C:12 mm; Weight:0,073 Kg; Basic dynamic load rating (C):10,7 kN;
Komatsu TEE "KD7-47100-0364 Ball seat	Width(mm):52; Size Standards:Metric System; Symbol of contact angle:No; I.D.(Ø):180; Basic Load Rating, Static Rating(N):675000; Specifications:Standard; Load Direction:Radial; Symbol of Bearing Ring Shape:No; Symbols of Lubrication Amount:No; Basic Load Rating, Dynamic Rating(N):495000;
Komatsu TEE "SD1211-46000X0 Ball seat	C1 - Cup Flange Width:0.1875 in; C - Cup Width:0.9375 in; Cup Part Number:31520-B; Bearing Weight:2.3 lb; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:3800 lbf; T - Bearing Width to Flange:0.4063 in; Cg - Geometry Factor11:0.0773; da - Cone Frontface Backing Diameter:1.71 in; G1 - Heat Generation Factor (Roller-Raceway)10:26.3; C0 - Static Radial Rating:24100 lbf;
Komatsu TEE 21N-62-42260 TEE	Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; RoHS:6; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Volume Discount:Available; Flange O.D. H(φ):77; Bearing Material:[Steel] Steel;
Komatsu TEE "	Shaft Tolerance:0.0010 in; Weight:9.0 lb; Dimension H:1.00 in; Dimension S:2.75 in; Grease Lubrication - B/C/O Seal:1950 rpm; Housing Style:Two-Bolt Pillow Bloc; Oil Lubrication - M/N Seal:2700 rpm; Dimension C:2.38 in; Y2 - Geometry Factor:3.67; Dimension D Min:4.69 in;
Komatsu TEE "	d:100 mm; ra max:2.5 mm; Radial clearance class:CN; Static load, C0:732 kN; Fatigue limit load, Cu:77.6 kN; F:127.5 mm; r1s min:3 mm; Characteristic outer ring frequency, BPF0:5.2 Hz; Mass (without HJ ring):12 kg; r1a max:2.5 mm;
Komatsu TEE "	Dimension H2:12.3 in; Cr - Dynamic Load Rating:71105 lbf; Bearing Type:Split Cylindrical Re; Dimension H :6 in; Dimension L :18-3/8 in; Maximum Speed:1970 rpm; Bolt Size:4 x 7/8; Dimension J2 :14-1/2 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Shaft Size:4.375 in;