Komatsu Glass 708-7H-16710 ELBOW	A1:16 mm; H:150 mm; C:35.1 kN; Recommended tightening torque for set screw:8 Nm; B:43.5 mm; S:10.9 mm; H1:55 mm; T max.:100 °C; T min.:-40 °C; s1:21.75 mm;
Komatsu Glass 21N-62-33550 ELBOW	db - Cone Backface Backing Diameter:13.35 in; a - Effective Center Location4:0.36 in; Series:940000; G2 - Heat Generation Factor (Rib-Roller End):187.4; Design Units:Imperial; G1 - Heat Generation Factor (Roller-Raceway):1771.6; da - Cone Frontface Backing Diameter:13.07 in; Cg - Geometry Factor:0.166; K - Factor8:1.45; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:607000 lbf;
Komatsu Glass 21N-38-31181 ELBOW	Rolling Element Material:Bearing Steel; Stroke:No; Basic Load Rating, Dynamic Rating(N):35100; Diameter series symbol:Used for Light load; Bearing Inner Dia. Shape:Tapered hole adapter; B:70; Machining:No; Unit Body Material:Cast Iron; d:45;
Komatsu Glass 8248-75-4170 CROSS	Brand:NTN; Mass:1.69 kg; Nlim (grease):1,800 rpm; Min operating temperature, Tmin:-20 °C; B:32 mm; e:60 mm; Characteristic inner ring frequency, BPFI:15.07 Hz; Precision class:P0; d:50 mm; Category:Bearings;
Komatsu Glass GJ1138023 CROSS	D:52 mm; S:7.5 mm; C1:4.3 mm; Recommended tightening torque for set screw:3.7 Nm; d1:37.4 mm; d:22.22 mm; T max.:200 °C; T min.:-20 °C; C:15 mm; r:0.6;
Komatsu Glass 23B-953-1660 Glass	A1:16 mm; H:150 mm; C:35.1 kN; Recommended tightening torque for set screw:8 Nm; B:43.5 mm; S:10.9 mm; H1:55 mm; T max.:100 °C; T min.:-40 °C; s1:21.75 mm;
Komatsu Glass 201-943-6120SS ELBOW	C:31.85 kN; N:M12; Designation of housing:PG209N-; L:120 mm; C0:20.8 kN; d:42.86 mm; E:22 mm; B:41.2 mm; T min.:-20 °C; H1:20 mm;
Komatsu Glass 6743-11-5820 ELBOW	Cr - Dynamic Load Rating:304391 lbf; Bolt Size:4 x M36; Series Type:Medium Series; Dimension V:0.2 in; Support Type:Round Flange; Dimension P:1.5 in; Maximum Speed:750 rpm; Bearing - Housing - Seal:MSE908BXHATL; Bearing UPC:013992033253; Note:This product line wa;