Komatsu switch 425-06-15111 switch	s1:27.8 mm; A1:39.5 mm; A:60 mm; H:61.3 mm; S:22.2 mm; L:219.5 mm; d:55 mm; Recommended tightening torque for set screw:22 Nm; C:43.55 kN; N1:26 mm;
Komatsu switch 7861-93-3440 switch	Nlim (oil):3,500 rpm; ra max:6.8 mm; Characteristic outer ring frequency, BPF0:10.74 Hz; Characteristic cage frequency, FTF:0.45 Hz; Min operating temperature, Tmin:-40 °C; Fatigue limit load, Cu:28 kN; Nlim (grease):2,600 rpm; e:0.4; Minimum Buy Quantity:N/A; Brand:NTN;
Komatsu switch 566-43-46182 switch	Bearing Retained:No; Flange Shape:Square Type; Volume Discount:Available; Flange O.D. H(φ):88; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing I.D. d(mm):30; Seals:DD (Contact Rubber S;
Komatsu switch 23W-05-19120 switch	Nlim (oil):3,500 rpm; ra max:6.8 mm; Characteristic outer ring frequency, BPF0:10.74 Hz; Characteristic cage frequency, FTF:0.45 Hz; Min operating temperature, Tmin:-40 °C; Fatigue limit load, Cu:28 kN; Nlim (grease):2,600 rpm; e:0.4; Minimum Buy Quantity:N/A; Brand:NTN;
Komatsu switch 7823-30-9214 Monitor	Unit Body Material:Cast Iron; Unit, Type:Bearing unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Square flange shape; Surface Treatment:No; Days to Ship:9 Days; Cover Type:Cast iron closing co; Rolling Element Material:Steel;
Komatsu switch "6754-71-7200SF Filter element	Brand:NTN; Characteristic outer ring frequency, BPF0:5.42 Hz; Max operating temperature, Tmax:120 °C; C0r:57 kN; Characteristic inner ring frequency, BPFI:7.58 Hz; Mass:0.12 kg; b:20.8 mm; Bc:20.8 mm; Ew:56 mm; Fw:40 mm;
Komatsu switch "	s1:27.8 mm; A1:39.5 mm; A:60 mm; H:61.3 mm; S:22.2 mm; L:219.5 mm; d:55 mm; Recommended tightening torque for set screw:22 Nm; C:43.55 kN; N1:26 mm;
Komatsu switch 207-30-56112SG CROSS	Bearing number:6409NR; Size (mm):45x120x29; Bore Diameter (mm):45,000; Outer Diameter (mm):120,000; Width (mm):29,000; d:45,000 mm; D:120,000 mm; B:29,000 mm; C:29,000 mm; a min:3.86 mm; a max:4.06 mm; Ca min:6.63 mm; Ca max:6.88 mm; rs min:2 mm; rNs min:0.5 mm; D3 max:115.21 mm; b min:3.1 mm; b max:3.4 mm; r0 max:0.6 mm; D4 max:129.7 mm; f:2.77 mm; Snap ring reference:R120; Radial clearance class:CN;