Komatsu Spring 706-77-91410 Spring 0	Thread Nominal T(inch):#10-32; Shape:Square; Type:Lock Nuts; RoHS:6; Days to Ship:14 Days; Surface Treatment:Surface Treatment Pr; Screw Type:Metric (Fine) Thread; Material:[Steel] 1045 Carbon;
Komatsu Spring 62ET0052BF Spring 0	Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Type:Bearings with Housin; Flange Shape:Round Type; Seals:DD (Contact Rubber S; Number of Bearings:Double; Bearing I.D. d(mm):8; Days to Ship:7 Days;
Komatsu Spring 706-77-91410 Spring 0	N1:16 mm; A2:28 mm; SW:3.18 mm; Z:52.4 mm; L2:10 mm; Dz:70 mm; A5:22.2 mm; Designation of closed end cover:SCC206; Designation of bearing:SUC206-19; Recommended tightening torque for set screw:3.9 Nm;
Komatsu Spring 206-30-22140AK Spring 65	Cone Part Number:EE982028; G1 - Heat Generation Factor (Roller-Raceway):4901.2; d:514.350 mm; Cage Type:Pin-Type; da - Cone Frontface Backing Diameter:548.89 mm; r - Cup Backface To Clear Radius2:3.30 mm; K - Factor7:1.23; G2 - Heat Generation Factor (Rib-Roller End):606.3; Da - Cup Frontface Backing Diameter:701.04 mm; Y - ISO Factor9:1.27;
Komatsu Spring 207-43-54121 Spring 0	Dimension RVV:0.62 in; Grease Lubrication - T Seal:1800 rpm; Shaft Tolerance:0.0030 in; Float:0.083 in; Dimension D:7.63 in; Shaft Size Type:Imperial; Weight:42 lb; Oil Lubrication - B/C/O Seal:1000 rpm; Dimension F:11.13 in; e - Geometry Factor:0.23;
Komatsu Spring 206-30-22140AK Spring 65	Cage Type:CR - Phenolic Outer; Limiting Speed (Grease):7900 rpm; Bearing Weight:1.617 Kg; d:105 mm; da - Inner Ring Backing Diameter:115.700 mm; Contact Angle:15 º; C0 - Static Radial Rating:89400 N; Da - Outer Ring Backing Diameter:150.0 mm; Bearing Width:26 mm; D:160 mm;
Komatsu Spring 206-30-22140 Spring 65	d:28.58 mm; Nlim (oil):8,100 rpm; D:64.29 mm; Brand:NTN; C:16.67 mm; Characteristic rolling element frequency, BSF:6.67 Hz; Dynamic load, C:51.5 kN; Y0:0.6; T:21.43 mm; Static load, C0:64.5 kN;
Komatsu Spring 207-43-74120 Spring 1	d:28.58 mm; Nlim (oil):8,100 rpm; D:64.29 mm; Brand:NTN; C:16.67 mm; Characteristic rolling element frequency, BSF:6.67 Hz; Dynamic load, C:51.5 kN; Y0:0.6; T:21.43 mm; Static load, C0:64.5 kN;