Komatsu Padding 17A-862-2140 FELT	d:33.34 mm; L1:225 mm; H2:41 mm; SW:3.97 mm; B:42.9 mm; T max.:100 °C; Weight:1.96 kg; Designation of open end cover:SCOU207-21; Dz:80 mm; G:R1/8";
Komatsu Padding 793-215-1110 WRENCH	Bolt Size:4 x M42; Support Type:Four-Bolt Plummer Bl; Series Type:Heavy Series; Shipping Weight:2088 lb; Note:This product line wa; Dimension J:29.0 in; Dimension H:13.740 in; Dimension H2:28.7 in; Seal Type:Kevlar Packing Seal; Bearing - Housing - Seal:HSE900BRHKPS;
Komatsu Padding 708-21-13410 CAM	C0 - Static Load:237000 lb; Oil Lubrication - B/C/O Seal:350 rpm; Full Timken Part Number:QVSN28V415SB; Dimension J (Bolt Size):1.250 in; Grease Lubrication - T Seal:900 rpm; Dimension SV:5.82 in; Grease Lubrication - M/N Seal:650 rpm; Dimension D Max:17.13 in; Pre Install Clearance Min:0.0063 in; Dimension G:4.610 in;
Komatsu Padding 569-74-41810 Padding	rs min:2 mm; db min:130 mm; Axial displacement K Factor:0.43; Static load, C0:103 kN; r1a max:1 mm; B:28 mm; Nlim (grease):7,000 rpm; Contact angle α:25 °; D2:168.91 mm; Min operating temperature, Tmin:-30 °C;
Komatsu Padding 708-21-13410 CAM	Shaft Size:2-7/16 in; Dimension J2 :8-5/8 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Series Type:Light Series; Dimension H2:7.2 in; Housing Width:4.0 in; Cor - Static Load Rating:25848 lbf; Cr - Dynamic Load Rating:23118 lbf; Maximum Speed:3940 rpm; Dimension L :11-1/8 in;
Komatsu Padding MC7901860030 WRENCH	rs min:2 mm; db min:130 mm; Axial displacement K Factor:0.43; Static load, C0:103 kN; r1a max:1 mm; B:28 mm; Nlim (grease):7,000 rpm; Contact angle α:25 °; D2:168.91 mm; Min operating temperature, Tmin:-30 °C;
Komatsu Padding 791-427-1410 WRENCH	Bolt Size:4 x M42; Support Type:Four-Bolt Plummer Bl; Series Type:Heavy Series; Shipping Weight:2088 lb; Note:This product line wa; Dimension J:29.0 in; Dimension H:13.740 in; Dimension H2:28.7 in; Seal Type:Kevlar Packing Seal; Bearing - Housing - Seal:HSE900BRHKPS;
Komatsu Padding 569-74-41810 Padding	C0:11.2 kN; N:14mm; Recommended tightening torque for set screw:5.5 Nm; N1:22 mm; Designation of bearing:UC206G2; Weight:1.12 kg; S:15.9 mm; Designation of housing:PE206-; B:38.1 mm; A:40 mm;