| Komatsu Padding 154-862-8890 FELT | rs min:2 mm; db min:130 mm; Axial displacement K Factor:0.43; Static load, C0:103 kN; r1a max:1 mm; B:28 mm; Nlim (grease):7,000 rpm; Contact angle α:25 °; D2:168.91 mm; Min operating temperature, Tmin:-30 °C; |
| Komatsu Padding 154-43-73641 Padding | RoHS:6; Unit Body Material:Cast Iron; Lubrication method:Oil Supply Type; d:25; Surface Treatment:No; Bearing Unit, Type:Pillow Type; Unit, Type:Bearing unit; Pillow Type, Category:Standard; Basic Load Rating, Dynamic Rating(N):25700; |
| Komatsu Padding 17M-862-3220 FELT | Cup Part Number:472-B; e - ISO Factor8:0.38; R - Cone Backface To Clear Radius1:0.09 in; C1 - Cup Flange Width:0.2180 in; C1 - Dynamic Radial Rating (1 million revolutions)5:32200 lbf; C - Cup Width:0.9542 in; d:2.5591 in; Cone Part Number:478; G1 - Heat Generation Factor (Roller-Raceway)10:77.2; Y - ISO Factor9:1.56; |
| Komatsu Padding YM119660-14092 CAM | I.D. d(φ):15; O.D. D(φ):30; Days to Ship:8 Days; RoHS:6; Volume Discount:Available; |
| Komatsu Padding KHJC-61802-15 WRENCH | RoHS:6; Unit Body Material:Cast Iron; Lubrication method:Oil Supply Type; d:25; Surface Treatment:No; Bearing Unit, Type:Pillow Type; Unit, Type:Bearing unit; Pillow Type, Category:Standard; Basic Load Rating, Dynamic Rating(N):25700; |
| Komatsu Padding 793-613-1110 WRENCH | C0:11.2 kN; N:14mm; Recommended tightening torque for set screw:5.5 Nm; N1:22 mm; Designation of bearing:UC206G2; Weight:1.12 kg; S:15.9 mm; Designation of housing:PE206-; B:38.1 mm; A:40 mm; |
| Komatsu Padding 708-8F-33581 CAM | C0 - Static Load:237000 lb; Oil Lubrication - B/C/O Seal:350 rpm; Full Timken Part Number:QVSN28V415SB; Dimension J (Bolt Size):1.250 in; Grease Lubrication - T Seal:900 rpm; Dimension SV:5.82 in; Grease Lubrication - M/N Seal:650 rpm; Dimension D Max:17.13 in; Pre Install Clearance Min:0.0063 in; Dimension G:4.610 in; |
| Komatsu Padding 423-926-2350 Padding | Cone Part Number:H715345; Series:H715300; D:5.5000 in; Aa - Cage-Cone Backface Clearance:0.14 in; Cg - Geometry Factor11:0.0993; r - Cup Backface To Clear Radius2:0.130 in; e - ISO Factor8:0.47; Y - ISO Factor9:1.27; D1 - Flange Outer Diameter:6 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:15100 lbf; |