Komatsu Padding 425-54-17333 Padding	Bolt Size:4 x M42; Support Type:Four-Bolt Plummer Bl; Series Type:Heavy Series; Shipping Weight:2088 lb; Note:This product line wa; Dimension J:29.0 in; Dimension H:13.740 in; Dimension H2:28.7 in; Seal Type:Kevlar Packing Seal; Bearing - Housing - Seal:HSE900BRHKPS;
Komatsu Padding 103-Y78-1320 Padding	Cup Part Number:472-B; e - ISO Factor8:0.38; R - Cone Backface To Clear Radius1:0.09 in; C1 - Cup Flange Width:0.2180 in; C1 - Dynamic Radial Rating (1 million revolutions)5:32200 lbf; C - Cup Width:0.9542 in; d:2.5591 in; Cone Part Number:478; G1 - Heat Generation Factor (Roller-Raceway)10:77.2; Y - ISO Factor9:1.56;
Komatsu Padding 113-Y79-2281 Padding	d:33.34 mm; L1:225 mm; H2:41 mm; SW:3.97 mm; B:42.9 mm; T max.:100 °C; Weight:1.96 kg; Designation of open end cover:SCOU207-21; Dz:80 mm; G:R1/8";
Komatsu Padding 708-1U-13490 CAM	rs min:2 mm; db min:130 mm; Axial displacement K Factor:0.43; Static load, C0:103 kN; r1a max:1 mm; B:28 mm; Nlim (grease):7,000 rpm; Contact angle α:25 °; D2:168.91 mm; Min operating temperature, Tmin:-30 °C;
Komatsu Padding 154-43-73641 Padding	Cup Part Number:472-B; e - ISO Factor8:0.38; R - Cone Backface To Clear Radius1:0.09 in; C1 - Cup Flange Width:0.2180 in; C1 - Dynamic Radial Rating (1 million revolutions)5:32200 lbf; C - Cup Width:0.9542 in; d:2.5591 in; Cone Part Number:478; G1 - Heat Generation Factor (Roller-Raceway)10:77.2; Y - ISO Factor9:1.56;
Komatsu Padding 708-1T-13580 CAM	C0:11.2 kN; N:14mm; Recommended tightening torque for set screw:5.5 Nm; N1:22 mm; Designation of bearing:UC206G2; Weight:1.12 kg; S:15.9 mm; Designation of housing:PE206-; B:38.1 mm; A:40 mm;
Komatsu Padding 8287-98-1110 WRENCH	Shaft Size:2-7/16 in; Dimension J2 :8-5/8 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Series Type:Light Series; Dimension H2:7.2 in; Housing Width:4.0 in; Cor - Static Load Rating:25848 lbf; Cr - Dynamic Load Rating:23118 lbf; Maximum Speed:3940 rpm; Dimension L :11-1/8 in;
Komatsu Padding 419-56-21250 Padding	C0:11.2 kN; N:14mm; Recommended tightening torque for set screw:5.5 Nm; N1:22 mm; Designation of bearing:UC206G2; Weight:1.12 kg; S:15.9 mm; Designation of housing:PE206-; B:38.1 mm; A:40 mm;