Komatsu cylinder assembly "23A-63-22101 cylinder assembly	e:18 mm; C0:11.2 kN; T min.:-40 °C; Dz:70 mm; Recommended tightening torque for set screw:11.5 Nm; s1:27.8 mm; Designation of open end cover:SCOE206-30; J:117 mm; d1:44.1 mm; d:30 mm;
Komatsu cylinder assembly "22J-63-02231 cylinder assembly	e:18 mm; C0:11.2 kN; T min.:-40 °C; Dz:70 mm; Recommended tightening torque for set screw:11.5 Nm; s1:27.8 mm; Designation of open end cover:SCOE206-30; J:117 mm; d1:44.1 mm; d:30 mm;
Komatsu cylinder assembly "	s1:20.6 mm; B:41.2 mm; L1:260 mm; Designation of bearing:US209-28G2T20; T min.:-20 °C; C:31.85 kN; A:31 mm; S:10.2 mm; H:120 mm; H2:61 mm;
Komatsu cylinder assembly "	G:M6x1; J:117 mm; Designation of housing:FA206N-; N:12mm; A:31 mm; Dz:70 mm; A1:14 mm; C0:11.2 kN; L:80 mm; Z:44.4 mm;
Komatsu cylinder assembly "	Category:Single Row Ball Bear; Snap Ring:No; Outer Race Width:0.748 Inch | 19 Mill; B:19 mm; UNSPSC:31171504; da min:36.5 mm; Characteristic rolling element frequency, BSF:4.14 Hz; Cage Material:Brass; Brand:NTN;
Komatsu cylinder assembly "	Type:Bearings with Housin; Volume Discount:Available; Shape:Flanged Pilot Type; Flange O.D. H(φ):47; RoHS:6; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea;
Komatsu cylinder assembly "	s1:20.6 mm; B:41.2 mm; L1:260 mm; Designation of bearing:US209-28G2T20; T min.:-20 °C; C:31.85 kN; A:31 mm; S:10.2 mm; H:120 mm; H2:61 mm;
Komatsu cylinder assembly "	Cr - Dynamic Load Rating:18659 lbf; Cor - Static Load Rating:19558 lbf; Shaft Size:1-15/16 in; Dimension G:4.6 in; Support Type:Hanger Block; Bearing UPC:013992025579; Bearing Type:Split Cylindrical Ex; Note:This product line wa; Bearing - Housing - Seal:LSE115BXHG; Dimension C:2.362 in;