Komatsu Sealed Kit "2909-20-2171 Sealed Kit	a - Effective Center Location3:16.8 mm; Y - ISO Factor9:0.74; Cg - Geometry Factor:0.148; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:99200 lbf; db - Cone Backface Backing Diameter:217.93 mm; Series:H936300; C0 - Static Radial Rating:316000 lbf; da - Cone Frontface Backing Diameter:192.53 mm; e - ISO Factor8:0.81; G2 - Heat Generation Factor (Rib-Roller End):69.1;
Komatsu Sealed Kit "	Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:ES203G2T04; Designation of open end cover:SCOE203-17; s1:23.05 mm; C0:4.78 kN; Z:56.3 mm; A1:18 mm; J:95 mm; S:6.5 mm; d:17 mm;
Komatsu Sealed Kit "	S:14.3 mm; N1:19 mm; N:13mm; Z:46.8 mm; A:38 mm; Designation of housing:SP205N-; d:25.4 mm; Designation of open end cover:SCOU205-16; T max.:100 °C; C:11 kN;
Komatsu Sealed Kit "	Stroke:No; Rolling Element Material:Bearing Steel; Seal:Nitrile; RoHS:6; Machining:No; Unit, Type:Insert Bearing Unit; Fit:J7; Surface Treatment:No;
Komatsu Sealed Kit "22T-65-11960 Sealed Kit	d:2.0000 in; expansion type:Expansion Bearing (Floating); overall length:8.3750 in; finish/coating:Uncoated; overall height:4.5625 in; B:2.84 in; mounting:Two-Bolt Base; seal type:Labyrinth; bearing type:Spherical Roller; radial dynamic load capacity:22000 lb; bore type:Round; radial static load capacity:24000 lb; housing construction:Solid Pillow Block; maximum rpm:3180 RPM; base to bore centerline:2.2500 in;
Komatsu Sealed Kit "6110-K2-9901 Sealed Kit	Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:ES203G2T04; Designation of open end cover:SCOE203-17; s1:23.05 mm; C0:4.78 kN; Z:56.3 mm; A1:18 mm; J:95 mm; S:6.5 mm; d:17 mm;
Komatsu Sealed Kit "TZ922B9000-00 Sealed Kit	S:14.3 mm; N1:19 mm; N:13mm; Z:46.8 mm; A:38 mm; Designation of housing:SP205N-; d:25.4 mm; Designation of open end cover:SCOU205-16; T max.:100 °C; C:11 kN;
Komatsu Sealed Kit "208-27-00140KL Sealed Kit	Stroke:No; Rolling Element Material:Bearing Steel; Seal:Nitrile; RoHS:6; Machining:No; Unit, Type:Insert Bearing Unit; Fit:J7; Surface Treatment:No;