Komatsu Sealed Kit "	Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.46 Hz; Nlim (grease):12,000 rpm; B:7 mm; Mass:0.03 kg; ra max:0.3 mm; Characteristic outer ring frequency, BPF0:10.16 Hz; D:52 mm; f0:16.3; Brand:NTN;
Komatsu Sealed Kit "	a - Effective Center Location4:0.09 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:46100 lbf; da - Cone Frontface Backing Diameter:3.19 in; G2 - Heat Generation Factor (Rib-Roller End):36.6; Design Units:Imperial; d:2.8750 in; db - Cone Backface Backing Diameter:3.43 in; C90 - Dynamic Radial Rating (90 million revolutions)5:6870 lbf; C0 - Static Radial Rating:41200 lbf; Ab - Cage-Cone Frontface Clearance:0.09 in;
Komatsu Sealed Kit "23B-22-21421 Sealed Kit	C:14 kN; Weight:1.23 kg; s1:17 mm; N:13mm; T max.:200 °C; A:50 mm; Designation of housing:PH205N-; Z:47.8 mm; B:34 mm; Recommended tightening torque for set screw:3.7 Nm;
Komatsu Sealed Kit "561-33-62950 Sealed Kit	a - Effective Center Location3:16.8 mm; Y - ISO Factor9:0.74; Cg - Geometry Factor:0.148; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:99200 lbf; db - Cone Backface Backing Diameter:217.93 mm; Series:H936300; C0 - Static Radial Rating:316000 lbf; da - Cone Frontface Backing Diameter:192.53 mm; e - ISO Factor8:0.81; G2 - Heat Generation Factor (Rib-Roller End):69.1;
Komatsu Sealed Kit "385-10380803 Sealed Kit	C:14 kN; Weight:1.23 kg; s1:17 mm; N:13mm; T max.:200 °C; A:50 mm; Designation of housing:PH205N-; Z:47.8 mm; B:34 mm; Recommended tightening torque for set screw:3.7 Nm;
Komatsu Sealed Kit "6201-K2-9901 Sealed Kit	Volume Discount:Available; Category:Cam Followers; Application:General; Basic Load Rating Cr (Dynamic)(kN):3.59; B:11; D:16; RoHS:6; Roller Guiding Method:Retainer Type;
Komatsu Sealed Kit "	s1:30.2 mm; T max.:100 °C; d:35 mm; e:19 mm; Z:29 mm; d1:55.6 mm; Designation of bearing:SES207; L:90 mm; B:25.4 mm; J:130 mm;
Komatsu Sealed Kit "6560-81-2710 Sealed Kit	C1:9 mm; d:75 mm; m:12 mm; r:2; C0:49.5 kN; T min.:-20 °C; Recommended tightening torque for set screw:33 Nm; SW:6 mm; G:M12x1,25; T max.:100 °C;