Komatsu Sealed Kit "17A-03-11151 Sealed Kit	ring separation:Separable Inner Ring; Separable:Inner Ring - Both Si; EAN:4547359000566; Retainer:Yes; Precision Class:RBEC 1 | ISO P0; manufacturer product page:Click here; B:17 mm; da min:31.5 mm; UNSPSC:31171547; Weight / Kilogram:0.236;
Komatsu Sealed Kit "	Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.46 Hz; Nlim (grease):12,000 rpm; B:7 mm; Mass:0.03 kg; ra max:0.3 mm; Characteristic outer ring frequency, BPF0:10.16 Hz; D:52 mm; f0:16.3; Brand:NTN;
Komatsu Sealed Kit "198-21-32231 Sealed Kit	Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.46 Hz; Nlim (grease):12,000 rpm; B:7 mm; Mass:0.03 kg; ra max:0.3 mm; Characteristic outer ring frequency, BPF0:10.16 Hz; D:52 mm; f0:16.3; Brand:NTN;
Komatsu Sealed Kit "20E-63-K5800 Sealed Kit	ring separation:Separable Inner Ring; Separable:Inner Ring - Both Si; EAN:4547359000566; Retainer:Yes; Precision Class:RBEC 1 | ISO P0; manufacturer product page:Click here; B:17 mm; da min:31.5 mm; UNSPSC:31171547; Weight / Kilogram:0.236;
Komatsu Sealed Kit "	s1:30.2 mm; T max.:100 °C; d:35 mm; e:19 mm; Z:29 mm; d1:55.6 mm; Designation of bearing:SES207; L:90 mm; B:25.4 mm; J:130 mm;
Komatsu Sealed Kit "19M-15-19240 Sealed Kit	Basic Load Rating, Dynamic Rating(N):167000; Holder Symbol:No; Basic Load Rating, Static Rating(N):199000; Precision Grade Symbol:No; Combination of two pieces:Standard; Inner/Outer Ring Material:Steel; Clearance sign:No; Specifications/Environment:Standard; D:150; Low Torque Specification:No;
Komatsu Sealed Kit "	a - Effective Center Location3:16.8 mm; Y - ISO Factor9:0.74; Cg - Geometry Factor:0.148; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:99200 lbf; db - Cone Backface Backing Diameter:217.93 mm; Series:H936300; C0 - Static Radial Rating:316000 lbf; da - Cone Frontface Backing Diameter:192.53 mm; e - ISO Factor8:0.81; G2 - Heat Generation Factor (Rib-Roller End):69.1;
Komatsu Sealed Kit "PZTK07HC050-6 Sealed Kit	C:14 kN; Weight:1.23 kg; s1:17 mm; N:13mm; T max.:200 °C; A:50 mm; Designation of housing:PH205N-; Z:47.8 mm; B:34 mm; Recommended tightening torque for set screw:3.7 Nm;