Komatsu Sealed Kit "	S:14.3 mm; N1:19 mm; N:13mm; Z:46.8 mm; A:38 mm; Designation of housing:SP205N-; d:25.4 mm; Designation of open end cover:SCOU205-16; T max.:100 °C; C:11 kN;
Komatsu Sealed Kit "6212-K1-9901 Sealed Kit	a - Effective Center Location4:0.09 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:46100 lbf; da - Cone Frontface Backing Diameter:3.19 in; G2 - Heat Generation Factor (Rib-Roller End):36.6; Design Units:Imperial; d:2.8750 in; db - Cone Backface Backing Diameter:3.43 in; C90 - Dynamic Radial Rating (90 million revolutions)5:6870 lbf; C0 - Static Radial Rating:41200 lbf; Ab - Cage-Cone Frontface Clearance:0.09 in;
Komatsu Sealed Kit "568-33-11511 Sealed Kit	Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:ES203G2T04; Designation of open end cover:SCOE203-17; s1:23.05 mm; C0:4.78 kN; Z:56.3 mm; A1:18 mm; J:95 mm; S:6.5 mm; d:17 mm;
Komatsu Sealed Kit "	Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:ES203G2T04; Designation of open end cover:SCOE203-17; s1:23.05 mm; C0:4.78 kN; Z:56.3 mm; A1:18 mm; J:95 mm; S:6.5 mm; d:17 mm;
Komatsu Sealed Kit "175-27-31472 Sealed Kit	C:14 kN; Weight:1.23 kg; s1:17 mm; N:13mm; T max.:200 °C; A:50 mm; Designation of housing:PH205N-; Z:47.8 mm; B:34 mm; Recommended tightening torque for set screw:3.7 Nm;
Komatsu Sealed Kit "8-97077-788-0KF Sealed Kit	Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.46 Hz; Nlim (grease):12,000 rpm; B:7 mm; Mass:0.03 kg; ra max:0.3 mm; Characteristic outer ring frequency, BPF0:10.16 Hz; D:52 mm; f0:16.3; Brand:NTN;
Komatsu Sealed Kit "19M-15-19240 Sealed Kit	Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.46 Hz; Nlim (grease):12,000 rpm; B:7 mm; Mass:0.03 kg; ra max:0.3 mm; Characteristic outer ring frequency, BPF0:10.16 Hz; D:52 mm; f0:16.3; Brand:NTN;
Komatsu Sealed Kit "175-63-16280 Sealed Kit	C:14 kN; Weight:1.23 kg; s1:17 mm; N:13mm; T max.:200 °C; A:50 mm; Designation of housing:PH205N-; Z:47.8 mm; B:34 mm; Recommended tightening torque for set screw:3.7 Nm;