Komatsu Sealed Kit "09410-10450 Sealed Kit | Stroke:No; Rolling Element Material:Bearing Steel; Seal:Nitrile; RoHS:6; Machining:No; Unit, Type:Insert Bearing Unit; Fit:J7; Surface Treatment:No; |
Komatsu Sealed Kit "56D-46-13320 Sealed Kit | C:14 kN; Weight:1.23 kg; s1:17 mm; N:13mm; T max.:200 °C; A:50 mm; Designation of housing:PH205N-; Z:47.8 mm; B:34 mm; Recommended tightening torque for set screw:3.7 Nm; |
Komatsu Sealed Kit "195-15-49281 Sealed Kit | A1:36 mm; C:52.5 kN; L1:52 mm; L:150 mm; A:68 mm; B1:62 mm; B:36 mm; Designation of housing:PA212-; Designation of bearing:UK212G2H; G:M6x1; |
Komatsu Sealed Kit " | C:14 kN; Weight:1.23 kg; s1:17 mm; N:13mm; T max.:200 °C; A:50 mm; Designation of housing:PH205N-; Z:47.8 mm; B:34 mm; Recommended tightening torque for set screw:3.7 Nm; |
Komatsu Sealed Kit "6134-K2-9901 Sealed Kit | s1:30.2 mm; T max.:100 °C; d:35 mm; e:19 mm; Z:29 mm; d1:55.6 mm; Designation of bearing:SES207; L:90 mm; B:25.4 mm; J:130 mm; |
Komatsu Sealed Kit " | C1:9 mm; d:75 mm; m:12 mm; r:2; C0:49.5 kN; T min.:-20 °C; Recommended tightening torque for set screw:33 Nm; SW:6 mm; G:M12x1,25; T max.:100 °C; |
Komatsu Sealed Kit " | H1:19 mm; C0:15.2 kN; Designation of bearing:UK207G2H; J:127 mm; Designation of open end cover:SCO207-30; Weight:2.35 kg; B1:43 mm; N1:21 mm; Adapter sleeve reference:H2307; L1:56 mm; |
Komatsu Sealed Kit "209-30-11341 Sealed Kit | a - Effective Center Location3:16.8 mm; Y - ISO Factor9:0.74; Cg - Geometry Factor:0.148; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:99200 lbf; db - Cone Backface Backing Diameter:217.93 mm; Series:H936300; C0 - Static Radial Rating:316000 lbf; da - Cone Frontface Backing Diameter:192.53 mm; e - ISO Factor8:0.81; G2 - Heat Generation Factor (Rib-Roller End):69.1; |