Komatsu Regulator 145-03-41520 Regulator	Designation of housing:P206-; N:17mm; L1:54 mm; A:48 mm; N1:21 mm; d:31.75 mm; s1:19.05 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of bearing:UC206-20G2; B:38.1 mm;
Komatsu Regulator 426-06-11690 Regulator	Designation of housing:P206-; N:17mm; L1:54 mm; A:48 mm; N1:21 mm; d:31.75 mm; s1:19.05 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of bearing:UC206-20G2; B:38.1 mm;
Komatsu Regulator 6166-61-1770 Regulator	G:M6x1; B:49.2 mm; Recommended tightening torque for set screw:8 Nm; s1:24.6 mm; H:52.4 mm; Designation of housing:PLE209-; C0:20.8 kN; T max.:100 °C; d:44.45 mm; L:197.5 mm;
Komatsu Regulator 42C-04-13440 Regulator	A:5.2500 in; Bolt Hole Length:1.375 in; Bolt Hole Width:0.750 in; F:2.75 in; B:16.5 in; Triple Seal 2 Req’d:LOR 112; D:2.1250 in; H:10.25 in; E:13.8750 in; Full Timken Part Number:SAF225244-1/8;
Komatsu Regulator 600-824-4950 Regulator	C:9.55 kN; H1:10 mm; B:22 mm; Designation of housing:PA203N-; T max.:100 °C; H:30.2 mm; T min.:-20 °C; Designation of bearing:US202-10G2; A1:19 mm; s1:11 mm;
Komatsu Regulator 42C-56-12320 Regulator	Category:Bearings; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:2.5; Product Group:M06110;
Komatsu Regulator 6631-81-7800 Regulator	Bearing Inner Dia. Shape:Cylindrical Bore Set; Pillow Type, Category:Standard; Bearing Unit, Type:Pillow Type; Surface Treatment:No; Accessory:No Cover; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Stroke:No; Seal:Nitrile; Basic Load Rating, Static Rating(N):61900;
Komatsu Regulator 6162-73-1290 Regulator	Bearing I.D. d(mm):15; Number of Bearings:Double; Width T(mm):35 ～ 60; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6902; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Bearing Retained:No; Housing Material:304 Stainless Steel;