Komatsu Regulator 600-183-7521 Regulator	Locking Style:Eccentric; Full Timken Part Number:QMMC20J400SB; Y1 - Geometry Factor:2.85; Dimension M:2.96 in; Grease Lubrication - M/N Seal:1200 rpm; Grease Lubrication - B/C/O Seal:900 rpm; Oil Lubrication - M/N Seal:1200 rpm; Oil Lubrication - B/C/O Seal:900 rpm; Dimension B:1.28 in; Bearing Number:22220;
Komatsu Regulator 427-43-11950 Regulator	G:M6x1; C:12.8 kN; T max.:100 °C; Dz:54 mm; Designation of housing:PH204N-; A1:22 mm; A:40 mm; s1:15.5 mm; Recommended tightening torque for set screw:5.5 Nm; J:95 mm;
Komatsu Regulator 3RA-34-62150KF Regulator	Bearing Inner Dia. Shape:Cylindrical Bore Set; Pillow Type, Category:Standard; Bearing Unit, Type:Pillow Type; Surface Treatment:No; Accessory:No Cover; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Stroke:No; Seal:Nitrile; Basic Load Rating, Static Rating(N):61900;
Komatsu Regulator 702-16-55780 Regulator	Designation of housing:P206-; N:17mm; L1:54 mm; A:48 mm; N1:21 mm; d:31.75 mm; s1:19.05 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of bearing:UC206-20G2; B:38.1 mm;
Komatsu Regulator 208-03-75140 Regulator	Bearing Retained:No; Bearing I.D. d(mm):15; Bearing Part Number:6902; Flange Shape:Square Type; Flange O.D. H(φ):57; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Type:Bearings with Housin;
Komatsu Regulator 235-70-13262 Regulator	Width T(mm):60 ～ 70; Number of Bearings:Double; Type:Bearings with Housin; Bearing Retained:No; Bearing I.D. d(mm):40; Shape:Flange Type; RoHS:6; Days to Ship:8 Days; Flange O.D. H(φ):114;
Komatsu Regulator 7861-91-2780 Regulator	G:M6x1; C:12.8 kN; T max.:100 °C; Dz:54 mm; Designation of housing:PH204N-; A1:22 mm; A:40 mm; s1:15.5 mm; Recommended tightening torque for set screw:5.5 Nm; J:95 mm;
Komatsu Regulator 45E-02-11310KF Regulator	A:5.2500 in; Bolt Hole Length:1.375 in; Bolt Hole Width:0.750 in; F:2.75 in; B:16.5 in; Triple Seal 2 Req’d:LOR 112; D:2.1250 in; H:10.25 in; E:13.8750 in; Full Timken Part Number:SAF225244-1/8;