Komatsu Regulator 709-61-11720 Regulator	G:M6x1; C:12.8 kN; T max.:100 °C; Dz:54 mm; Designation of housing:PH204N-; A1:22 mm; A:40 mm; s1:15.5 mm; Recommended tightening torque for set screw:5.5 Nm; J:95 mm;
Komatsu Regulator 42C-04-13440 Regulator	A:5.2500 in; Bolt Hole Length:1.375 in; Bolt Hole Width:0.750 in; F:2.75 in; B:16.5 in; Triple Seal 2 Req’d:LOR 112; D:2.1250 in; H:10.25 in; E:13.8750 in; Full Timken Part Number:SAF225244-1/8;
Komatsu Regulator 10S-06-21810 Regulator	Category:Mounted Units & Inserts; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:6.719; Product Group:M06288;
Komatsu Regulator 20Y-27-13270 Regulator	A:5.2500 in; Bolt Hole Length:1.375 in; Bolt Hole Width:0.750 in; F:2.75 in; B:16.5 in; Triple Seal 2 Req’d:LOR 112; D:2.1250 in; H:10.25 in; E:13.8750 in; Full Timken Part Number:SAF225244-1/8;
Komatsu Regulator 569-50-6B160 Regulator	Bearing Retained:No; Bearing I.D. d(mm):15; Bearing Part Number:6902; Flange Shape:Square Type; Flange O.D. H(φ):57; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Type:Bearings with Housin;
Komatsu Regulator 208-01-58210 Regulator	d:12 mm; static load capacity:1640 lbf; D:18 mm; cage material:Steel; B:14 mm; maximum rpm:14000 RPM; drawn cup type:Open Ends; precision rating:Not Rated; closure type:Single Seal; series:HK; number of rows:One; lubrication hole type:No Hole; operating temperature range:-30 to +100 °C; standards met:DIN 618-2; dynamic load capacity:1460 lbf;
Komatsu Regulator 6738-61-4123 Regulator	C:9.55 kN; H1:10 mm; B:22 mm; Designation of housing:PA203N-; T max.:100 °C; H:30.2 mm; T min.:-20 °C; Designation of bearing:US202-10G2; A1:19 mm; s1:11 mm;
Komatsu Regulator 796-770-1301 Regulator	G:M6x1; B:49.2 mm; Recommended tightening torque for set screw:8 Nm; s1:24.6 mm; H:52.4 mm; Designation of housing:PLE209-; C0:20.8 kN; T max.:100 °C; d:44.45 mm; L:197.5 mm;