Komatsu Regulator 6251-11-5440 Regulator | G:M6x1; C:12.8 kN; T max.:100 °C; Dz:54 mm; Designation of housing:PH204N-; A1:22 mm; A:40 mm; s1:15.5 mm; Recommended tightening torque for set screw:5.5 Nm; J:95 mm; |
Komatsu Regulator 21D-57-11230 Regulator | Grease Type:Standard Grease; Unit, Type:Insert Bearing Unit; RoHS:6; Stroke:No; Machining:No; Bearing Unit, Type:Square flange shape; Surface Treatment:No; Accessory:With steel plate cov; Diameter series symbol:Medium Load; Basic Load Rating, Static Rating(N):40100; |
Komatsu Regulator 234-993-6501 Regulator | Housing Material:[Aluminum Alloy] 201; Shape:Flanged Pilot Type; Type:Bearings with Housin; Width T(mm):60 ~ 70; RoHS:6; Bearing I.D. d(mm):17; Bearing Retained:No; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; |
Komatsu Regulator TW7010-0220 Regulator | Designation of housing:P206-; N:17mm; L1:54 mm; A:48 mm; N1:21 mm; d:31.75 mm; s1:19.05 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of bearing:UC206-20G2; B:38.1 mm; |
Komatsu Regulator 42C-70-13230 Regulator | Bearing Retained:No; Bearing I.D. d(mm):15; Bearing Part Number:6902; Flange Shape:Square Type; Flange O.D. H(φ):57; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Type:Bearings with Housin; |
Komatsu Regulator 20Y-810-1221 Regulator | Locking Style:Eccentric; Full Timken Part Number:QMMC20J400SB; Y1 - Geometry Factor:2.85; Dimension M:2.96 in; Grease Lubrication - M/N Seal:1200 rpm; Grease Lubrication - B/C/O Seal:900 rpm; Oil Lubrication - M/N Seal:1200 rpm; Oil Lubrication - B/C/O Seal:900 rpm; Dimension B:1.28 in; Bearing Number:22220; |
Komatsu Regulator 201-06-71820 Regulator | Bearing Inner Dia. Shape:Cylindrical Bore Set; Pillow Type, Category:Standard; Bearing Unit, Type:Pillow Type; Surface Treatment:No; Accessory:No Cover; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Stroke:No; Seal:Nitrile; Basic Load Rating, Static Rating(N):61900; |
Komatsu Regulator 3RA-56-62523KF Regulator | A:5.2500 in; Bolt Hole Length:1.375 in; Bolt Hole Width:0.750 in; F:2.75 in; B:16.5 in; Triple Seal 2 Req’d:LOR 112; D:2.1250 in; H:10.25 in; E:13.8750 in; Full Timken Part Number:SAF225244-1/8; |