Komatsu Protruding "20Y-977-2140 Control box	H1:89 mm; Recommended tightening torque for set screw:3.7 Nm; s1:19.05 mm; C:19.5 kN; T min.:-20 °C; L1:70 mm; G:M6x1; A2:28 mm; S:15.9 mm; T max.:100 °C;
Komatsu Protruding 30B-47-11440KF MODULE 1	Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Days to Ship:7 Days; Width T(mm):25; Bearing Part Number:6902; Holder Surface Treatment:Electroless Nickel P; Shape:Flange Type;
Komatsu Protruding "	Brand:NTN; Ew:24 mm; Bc:24.8 mm; Inventory:0.0; Category:Roller Bearings; Characteristic outer ring frequency, BPF0:8.18 Hz; Characteristic cage frequency, FTF:0.46 Hz; Fw:20 mm; Lw:19.8 mm; Characteristic inner ring frequency, BPFI:9.82 Hz;
Komatsu Protruding 130-70-12160 Protruding	Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; Seals:DD (Contact Rubber S; Shape:Flanged Pilot Type; Flange Shape:Round Type; Bearing Part Number:6208; Number of Bearings:Double;
Komatsu Protruding 206-70-62220 Protruding	Brand:NTN; Ew:24 mm; Bc:24.8 mm; Inventory:0.0; Category:Roller Bearings; Characteristic outer ring frequency, BPF0:8.18 Hz; Characteristic cage frequency, FTF:0.46 Hz; Fw:20 mm; Lw:19.8 mm; Characteristic inner ring frequency, BPFI:9.82 Hz;
Komatsu Protruding 140-70-12161 Protruding	Grease Lubrication - M/N Seal:1400 rpm; C - Dynamic Load (Basic):79700 lb; Pre Install Clearance Max:0.0039 in; Dimension R:0.84 in; Y1 - Geometry Factor:2.90; Full Timken Part Number:QAAPX18A085SB; Oil Lubrication - T Seal:2400 rpm; Dimension G:4.7500 in; Dimension J (Bolt Size):0.750 in; UPC Code:0883450322379;
Komatsu Protruding 711-50-41532 Protruding	Characteristic inner ring frequency, BPFI:9.38 Hz; db min:35.5 mm; d:30 mm; Max operating temperature, Tmax:120 °C; ra max:1 mm; ISO 355 reference:T2DE030; Characteristic outer ring frequency, BPF0:6.62 Hz; Da max:56.5 mm; rs min:1 mm; Brand:NTN;
Komatsu Protruding 7826-36-1101 MODULE	Grease Lubrication - M/N Seal:1400 rpm; C - Dynamic Load (Basic):79700 lb; Pre Install Clearance Max:0.0039 in; Dimension R:0.84 in; Y1 - Geometry Factor:2.90; Full Timken Part Number:QAAPX18A085SB; Oil Lubrication - T Seal:2400 rpm; Dimension G:4.7500 in; Dimension J (Bolt Size):0.750 in; UPC Code:0883450322379;