| Komatsu Protruding "20Y-977-2140 Control box | C:18 mm; D3:120 mm; Locknut:KM18; d1:80.00 mm; Thread G:M90x2; Appropriate Hydraulic Nut:HMV18; Lockwasher and Lockplates:MB18; Weight:1.69 Kg; L:86.00 mm; |
| Komatsu Protruding 7826-36-1101 MODULE | Grease Lubrication - M/N Seal:1400 rpm; C - Dynamic Load (Basic):79700 lb; Pre Install Clearance Max:0.0039 in; Dimension R:0.84 in; Y1 - Geometry Factor:2.90; Full Timken Part Number:QAAPX18A085SB; Oil Lubrication - T Seal:2400 rpm; Dimension G:4.7500 in; Dimension J (Bolt Size):0.750 in; UPC Code:0883450322379; |
| Komatsu Protruding 141-14-32162 Protruding | Characteristic inner ring frequency, BPFI:9.38 Hz; db min:35.5 mm; d:30 mm; Max operating temperature, Tmax:120 °C; ra max:1 mm; ISO 355 reference:T2DE030; Characteristic outer ring frequency, BPF0:6.62 Hz; Da max:56.5 mm; rs min:1 mm; Brand:NTN; |
| Komatsu Protruding 198-30-51760 Protruding | Shape:Flange Type; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Flange Shape:Compact Type; Bearing Part Number:6002; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Material:Stainless Steel; Seals:ZZ (Double Shield); |
| Komatsu Protruding 421-46-11S42 Protruding | Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Dynamic Rating(N):12800; Surface Treatment:No; Pillow Type, Category:Standard; Bearing Unit, Type:Pillow Type; RoHS:6; Unit Body Material:Cast Iron; Seal:With double rubber s; |
| Komatsu Protruding ANZ-RH17444YKF HEAT EXCHANGER | H1:89 mm; Recommended tightening torque for set screw:3.7 Nm; s1:19.05 mm; C:19.5 kN; T min.:-20 °C; L1:70 mm; G:M6x1; A2:28 mm; S:15.9 mm; T max.:100 °C; |
| Komatsu Protruding " | Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Dynamic Rating(N):12800; Surface Treatment:No; Pillow Type, Category:Standard; Bearing Unit, Type:Pillow Type; RoHS:6; Unit Body Material:Cast Iron; Seal:With double rubber s; |
| Komatsu Protruding 130-14-65251 Protruding | H1:89 mm; Recommended tightening torque for set screw:3.7 Nm; s1:19.05 mm; C:19.5 kN; T min.:-20 °C; L1:70 mm; G:M6x1; A2:28 mm; S:15.9 mm; T max.:100 °C; |