| Komatsu Protruding ANZ-RH17444YKF HEAT EXCHANGER | C:18 mm; D3:120 mm; Locknut:KM18; d1:80.00 mm; Thread G:M90x2; Appropriate Hydraulic Nut:HMV18; Lockwasher and Lockplates:MB18; Weight:1.69 Kg; L:86.00 mm; |
| Komatsu Protruding 135-70-33150 Protruding | Brand:NTN; Ew:24 mm; Bc:24.8 mm; Inventory:0.0; Category:Roller Bearings; Characteristic outer ring frequency, BPF0:8.18 Hz; Characteristic cage frequency, FTF:0.46 Hz; Fw:20 mm; Lw:19.8 mm; Characteristic inner ring frequency, BPFI:9.82 Hz; |
| Komatsu Protruding " | s1:11 mm; A:29.5 mm; Designation of housing:FE203-; Weight:0.38 kg; J:63.5 mm; S:6 mm; G:R1/8"; d:15 mm; L:86 mm; B:22 mm; |
| Komatsu Protruding 20T-01-71110 Protruding | Grease Lubrication - M/N Seal:1400 rpm; C - Dynamic Load (Basic):79700 lb; Pre Install Clearance Max:0.0039 in; Dimension R:0.84 in; Y1 - Geometry Factor:2.90; Full Timken Part Number:QAAPX18A085SB; Oil Lubrication - T Seal:2400 rpm; Dimension G:4.7500 in; Dimension J (Bolt Size):0.750 in; UPC Code:0883450322379; |
| Komatsu Protruding 421-46-11S42 Protruding | Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Dynamic Rating(N):12800; Surface Treatment:No; Pillow Type, Category:Standard; Bearing Unit, Type:Pillow Type; RoHS:6; Unit Body Material:Cast Iron; Seal:With double rubber s; |
| Komatsu Protruding "417-963-3120 Control box | Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Days to Ship:7 Days; Width T(mm):25; Bearing Part Number:6902; Holder Surface Treatment:Electroless Nickel P; Shape:Flange Type; |
| Komatsu Protruding NJ22710-FU460KF MODULE | Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Dynamic Rating(N):12800; Surface Treatment:No; Pillow Type, Category:Standard; Bearing Unit, Type:Pillow Type; RoHS:6; Unit Body Material:Cast Iron; Seal:With double rubber s; |
| Komatsu Protruding "235-40-14370 Control box | Bolt Hole Length N1:28.6 mm; Dimension B1:1.72 in; Bolt Hole Spacing J:149.2 mm; Bearing Number:GRA112RRB; Bolt Hole Width N:14.3 mm; Base to Center Height H:52.39 mm; Housing Style:Two-Bolt Pillow Bloc; Foot Height H1:17.5 mm; Center of Bearing from End S:11.2 mm; Total Length L:191.3 mm; |