Komatsu Protruding 7826-36-1101 MODULE	Grease Lubrication - M/N Seal:1400 rpm; C - Dynamic Load (Basic):79700 lb; Pre Install Clearance Max:0.0039 in; Dimension R:0.84 in; Y1 - Geometry Factor:2.90; Full Timken Part Number:QAAPX18A085SB; Oil Lubrication - T Seal:2400 rpm; Dimension G:4.7500 in; Dimension J (Bolt Size):0.750 in; UPC Code:0883450322379;
Komatsu Protruding 175-937-1153 Protruding	Characteristic inner ring frequency, BPFI:9.38 Hz; db min:35.5 mm; d:30 mm; Max operating temperature, Tmax:120 °C; ra max:1 mm; ISO 355 reference:T2DE030; Characteristic outer ring frequency, BPF0:6.62 Hz; Da max:56.5 mm; rs min:1 mm; Brand:NTN;
Komatsu Protruding 421-46-11S42 Protruding	C0:6.65 kN; A1:12 mm; Designation of bearing:UC203G2L4; T max.:100 °C; H:89 mm; G:M6x1; T min.:-20 °C; Weight:0.78 kg; L2:10 mm; d:17 mm;
Komatsu Protruding ANZ-RH17444YKF HEAT EXCHANGER	H1:89 mm; Recommended tightening torque for set screw:3.7 Nm; s1:19.05 mm; C:19.5 kN; T min.:-20 °C; L1:70 mm; G:M6x1; A2:28 mm; S:15.9 mm; T max.:100 °C;
Komatsu Protruding "	Bolt Hole Length N1:28.6 mm; Dimension B1:1.72 in; Bolt Hole Spacing J:149.2 mm; Bearing Number:GRA112RRB; Bolt Hole Width N:14.3 mm; Base to Center Height H:52.39 mm; Housing Style:Two-Bolt Pillow Bloc; Foot Height H1:17.5 mm; Center of Bearing from End S:11.2 mm; Total Length L:191.3 mm;
Komatsu Protruding 135-70-33150 Protruding	s1:38.9 mm; d:75 mm; e:34 mm; B:77.8 mm; Designation of housing:F215-; Weight:5.81 kg; S:33.3 mm; C0:49.5 kN; A:56 mm; L:200 mm;
Komatsu Protruding 145-70-43180 Protruding	Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Dynamic Rating(N):12800; Surface Treatment:No; Pillow Type, Category:Standard; Bearing Unit, Type:Pillow Type; RoHS:6; Unit Body Material:Cast Iron; Seal:With double rubber s;
Komatsu Protruding "417-963-3120 Control box	Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Days to Ship:7 Days; Width T(mm):25; Bearing Part Number:6902; Holder Surface Treatment:Electroless Nickel P; Shape:Flange Type;