Komatsu CONNECTOR 6261-11-9180 CONNECTOR	Rolling Element Material:Bearing Steel; Accessory:With steel plate cov; Stroke:No; Diameter series symbol:For Heavy Load; Unit Body Material:Cast Iron; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7; d:55; Seal:Silicone;
Komatsu CONNECTOR 6215-11-8462 CONNECTOR	A:34 mm; G:M6x1; d:34.92 mm; A1:14 mm; T max.:200 °C; B:32 mm; Designation of housing:FL207N-; C:25.7 kN; s1:16 mm; T min.:-20 °C;
Komatsu CONNECTOR 6738-11-4450 CONNECTOR	A:32 mm; G:R1/8"; L:65 mm; Recommended tightening torque for set screw:3.7 Nm; J:50.8 mm; H1:9 mm; N:M8; C0:6.65 kN; A1:19 mm; Z:15.9 mm;
Komatsu CONNECTOR 6207-11-4380 CONNECTOR	C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:93000 lbf; C0 - Static Radial Rating:103000 lbf; Cone Part Number:544090; Ab - Cage-Cone Frontface Clearance:0.15 in; Aa - Cage-Cone Backface Clearance:0.13 in; a - Effective Center Location4:0.62 in; C90 - Dynamic Radial Rating (90 million revolutions)5:13900 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:9530 lbf; G2 - Heat Generation Factor (Rib-Roller End):279.2;
Komatsu CONNECTOR 6275-11-6430 CONNECTOR	b:5.4 mm; D1:70.8 mm; Number of lubrication holes:3; Y1:2.47; da min:47 mm; Associated sleeve reference:H308; Nlim:11,000 rpm; Static load, C0:105 kN; D:80 mm; Dynamic load, C:116 kN;
Komatsu CONNECTOR 6215-11-4810 AIR CONNECTOR	D:140 mm; Snap Ring:No; Min operating temperature, Tmin:-40 °C; Category:Cylindrical Roller B; Outside Diameter:5.512 Inch | 140 Mil; Separable:Outer Ring - Both Si; da min:89 mm; Radial clearance class:C3; B:26 mm; Relubricatable:Yes;
Komatsu CONNECTOR 6215-65-6731 CONNECTOR	A2:75.8 mm; d1:82 mm; Recommended tightening torque for set screw:22 Nm; T max.:200 °C; B:61.8 mm; Weight:4.57 kg; s1:53.2 mm; L1:118 mm; S:30.9 mm; L:140 mm;
Komatsu CONNECTOR 6933-51-5830 CONNECTOR	Rolling Element Material:Bearing Steel; Accessory:With steel plate cov; Stroke:No; Diameter series symbol:For Heavy Load; Unit Body Material:Cast Iron; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7; d:55; Seal:Silicone;