Komatsu CONNECTOR 6276-11-4310 CONNECTOR	b:5.4 mm; D1:70.8 mm; Number of lubrication holes:3; Y1:2.47; da min:47 mm; Associated sleeve reference:H308; Nlim:11,000 rpm; Static load, C0:105 kN; D:80 mm; Dynamic load, C:116 kN;
Komatsu CONNECTOR 6731-61-6260 CONNECTOR	C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:93000 lbf; C0 - Static Radial Rating:103000 lbf; Cone Part Number:544090; Ab - Cage-Cone Frontface Clearance:0.15 in; Aa - Cage-Cone Backface Clearance:0.13 in; a - Effective Center Location4:0.62 in; C90 - Dynamic Radial Rating (90 million revolutions)5:13900 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:9530 lbf; G2 - Heat Generation Factor (Rib-Roller End):279.2;
Komatsu CONNECTOR 6262-61-9120 CONNECTOR	C0:11.2 kN; T min.:-20 °C; L:113 mm; Z:52.5 mm; A5:22 mm; SW:3.18 mm; A1:12 mm; N2:37 mm; Designation of bearing:US206-18G2T20; H2:56 mm;
Komatsu CONNECTOR 6208-11-4321 CONNECTOR	Recommended tightening torque for set screw:8 Nm; J:127 mm; C:25.7 kN; C0:15.2 kN; H2:140 mm; H:95 mm; T max.:100 °C; d:31.75 mm; N:17mm; L:167 mm;
Komatsu CONNECTOR 423-02-59321 CONNECTOR	K - Factor2:1.76; C1 - Cup Flange Width:0.5000 in; C - Cup Width:2.1250 in; Cup Part Number:M249710-B; Cg - Geometry Factor5:0.153; e - ISO Factor3:0.33; Y - ISO Factor4:1.8; D1 - Flange Outer Diameter:14.6250 in; Series:M249700; r - Cup Backface To Clear Radius1:0.130 in;
Komatsu CONNECTOR 6934-82-9810 CONNECTOR	A:32 mm; G:R1/8"; L:65 mm; Recommended tightening torque for set screw:3.7 Nm; J:50.8 mm; H1:9 mm; N:M8; C0:6.65 kN; A1:19 mm; Z:15.9 mm;
Komatsu CONNECTOR 56D-03-31790 CONNECTOR	D:140 mm; Snap Ring:No; Min operating temperature, Tmin:-40 °C; Category:Cylindrical Roller B; Outside Diameter:5.512 Inch | 140 Mil; Separable:Outer Ring - Both Si; da min:89 mm; Radial clearance class:C3; B:26 mm; Relubricatable:Yes;
Komatsu CONNECTOR 6261-11-4360 CONNECTOR	Rolling Element Material:Bearing Steel; Accessory:With steel plate cov; Stroke:No; Diameter series symbol:For Heavy Load; Unit Body Material:Cast Iron; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7; d:55; Seal:Silicone;