Komatsu CONNECTOR 6263-11-5710 CONNECTOR	Bearing Type:Split Cylindrical Ex; Series Type:Light Series; Cor - Static Load Rating:25853 lbf; Seal Type:Viton Single Lip; Maximum Speed:3940 rpm; Support Type:Round Flange; Bearing - Housing - Seal UPC:013992102522; Shaft Size:2.25 in; Dimension P:0.6 in; Dimension R:8.6 in;
Komatsu CONNECTOR 11Y-01-52421 CONNECTOR	K - Factor2:1.76; C1 - Cup Flange Width:0.5000 in; C - Cup Width:2.1250 in; Cup Part Number:M249710-B; Cg - Geometry Factor5:0.153; e - ISO Factor3:0.33; Y - ISO Factor4:1.8; D1 - Flange Outer Diameter:14.6250 in; Series:M249700; r - Cup Backface To Clear Radius1:0.130 in;
Komatsu CONNECTOR 6263-61-6210 CONNECTOR	C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:93000 lbf; C0 - Static Radial Rating:103000 lbf; Cone Part Number:544090; Ab - Cage-Cone Frontface Clearance:0.15 in; Aa - Cage-Cone Backface Clearance:0.13 in; a - Effective Center Location4:0.62 in; C90 - Dynamic Radial Rating (90 million revolutions)5:13900 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:9530 lbf; G2 - Heat Generation Factor (Rib-Roller End):279.2;
Komatsu CONNECTOR 6215-11-4820 AIR CONNECTOR	A2:75.8 mm; d1:82 mm; Recommended tightening torque for set screw:22 Nm; T max.:200 °C; B:61.8 mm; Weight:4.57 kg; s1:53.2 mm; L1:118 mm; S:30.9 mm; L:140 mm;
Komatsu CONNECTOR 6151-12-4911 CONNECTOR	A:32 mm; G:R1/8"; L:65 mm; Recommended tightening torque for set screw:3.7 Nm; J:50.8 mm; H1:9 mm; N:M8; C0:6.65 kN; A1:19 mm; Z:15.9 mm;
Komatsu CONNECTOR 6212-62-6630 CONNECTOR	D3:950 mm; e:8 mm; Weight:526.00 Kg; Appropriate Hydraulic Nut:HMV150; Lockwasher and Lockplates:MS31/750; d1:710.00 mm; G:Tr750x7; C1:141.00 mm; L1:603.00 mm; Ro:G1/8;
Komatsu CONNECTOR 6151-12-5460 CONNECTOR	b:5.4 mm; D1:70.8 mm; Number of lubrication holes:3; Y1:2.47; da min:47 mm; Associated sleeve reference:H308; Nlim:11,000 rpm; Static load, C0:105 kN; D:80 mm; Dynamic load, C:116 kN;
Komatsu CONNECTOR 6741-61-6120 CONNECTOR	C0:11.2 kN; T min.:-20 °C; L:113 mm; Z:52.5 mm; A5:22 mm; SW:3.18 mm; A1:12 mm; N2:37 mm; Designation of bearing:US206-18G2T20; H2:56 mm;