Komatsu CONNECTOR 6136-81-8621 CONNECTOR	A:34 mm; G:M6x1; d:34.92 mm; A1:14 mm; T max.:200 °C; B:32 mm; Designation of housing:FL207N-; C:25.7 kN; s1:16 mm; T min.:-20 °C;
Komatsu CONNECTOR 6934-62-6750 CONNECTOR	A:32 mm; G:R1/8"; L:65 mm; Recommended tightening torque for set screw:3.7 Nm; J:50.8 mm; H1:9 mm; N:M8; C0:6.65 kN; A1:19 mm; Z:15.9 mm;
Komatsu CONNECTOR 6246-61-9261 CONNECTOR	K - Factor2:1.76; C1 - Cup Flange Width:0.5000 in; C - Cup Width:2.1250 in; Cup Part Number:M249710-B; Cg - Geometry Factor5:0.153; e - ISO Factor3:0.33; Y - ISO Factor4:1.8; D1 - Flange Outer Diameter:14.6250 in; Series:M249700; r - Cup Backface To Clear Radius1:0.130 in;
Komatsu CONNECTOR 6275-11-6430 CONNECTOR	D:140 mm; Snap Ring:No; Min operating temperature, Tmin:-40 °C; Category:Cylindrical Roller B; Outside Diameter:5.512 Inch | 140 Mil; Separable:Outer Ring - Both Si; da min:89 mm; Radial clearance class:C3; B:26 mm; Relubricatable:Yes;
Komatsu CONNECTOR 6734-11-4211 CONNECTOR	b:5.4 mm; D1:70.8 mm; Number of lubrication holes:3; Y1:2.47; da min:47 mm; Associated sleeve reference:H308; Nlim:11,000 rpm; Static load, C0:105 kN; D:80 mm; Dynamic load, C:116 kN;
Komatsu CONNECTOR 6127-13-4331 CONNECTOR	A:34 mm; G:M6x1; d:34.92 mm; A1:14 mm; T max.:200 °C; B:32 mm; Designation of housing:FL207N-; C:25.7 kN; s1:16 mm; T min.:-20 °C;
Komatsu CONNECTOR 6261-11-5010 CONNECTOR	Unit Body Material:Cast Iron; Pillow Type, Category:Standard; B:88.9; Bearing Unit, Type:Pillow Type; Rolling Element Material:Bearing Steel; d:80; Basic Load Rating, Static Rating(N):53000; Basic Load Rating, Dynamic Rating(N):72700; Machining:Oil-free type;
Komatsu CONNECTOR 6166-63-6320 CONNECTOR	Recommended tightening torque for set screw:8 Nm; J:127 mm; C:25.7 kN; C0:15.2 kN; H2:140 mm; H:95 mm; T max.:100 °C; d:31.75 mm; N:17mm; L:167 mm;