Komatsu CONNECTOR 6150-51-6810 CONNECTOR	K - Factor2:1.76; C1 - Cup Flange Width:0.5000 in; C - Cup Width:2.1250 in; Cup Part Number:M249710-B; Cg - Geometry Factor5:0.153; e - ISO Factor3:0.33; Y - ISO Factor4:1.8; D1 - Flange Outer Diameter:14.6250 in; Series:M249700; r - Cup Backface To Clear Radius1:0.130 in;
Komatsu CONNECTOR 26C-02-11130 CONNECTOR	C0:11.2 kN; T min.:-20 °C; L:113 mm; Z:52.5 mm; A5:22 mm; SW:3.18 mm; A1:12 mm; N2:37 mm; Designation of bearing:US206-18G2T20; H2:56 mm;
Komatsu CONNECTOR 600-841-3760 CONNECTOR	A2:75.8 mm; d1:82 mm; Recommended tightening torque for set screw:22 Nm; T max.:200 °C; B:61.8 mm; Weight:4.57 kg; s1:53.2 mm; L1:118 mm; S:30.9 mm; L:140 mm;
Komatsu CONNECTOR 6751-61-6100 CONNECTOR	b:5.4 mm; D1:70.8 mm; Number of lubrication holes:3; Y1:2.47; da min:47 mm; Associated sleeve reference:H308; Nlim:11,000 rpm; Static load, C0:105 kN; D:80 mm; Dynamic load, C:116 kN;
Komatsu CONNECTOR 6215-65-6340 CONNECTOR	D:140 mm; Snap Ring:No; Min operating temperature, Tmin:-40 °C; Category:Cylindrical Roller B; Outside Diameter:5.512 Inch | 140 Mil; Separable:Outer Ring - Both Si; da min:89 mm; Radial clearance class:C3; B:26 mm; Relubricatable:Yes;
Komatsu CONNECTOR 6215-61-6311 CONNECTOR	b:5.4 mm; D1:70.8 mm; Number of lubrication holes:3; Y1:2.47; da min:47 mm; Associated sleeve reference:H308; Nlim:11,000 rpm; Static load, C0:105 kN; D:80 mm; Dynamic load, C:116 kN;
Komatsu CONNECTOR PZTK07BM012 CONNECTOR	D:140 mm; Snap Ring:No; Min operating temperature, Tmin:-40 °C; Category:Cylindrical Roller B; Outside Diameter:5.512 Inch | 140 Mil; Separable:Outer Ring - Both Si; da min:89 mm; Radial clearance class:C3; B:26 mm; Relubricatable:Yes;
Komatsu CONNECTOR 6933-51-5830 CONNECTOR	A:32 mm; G:R1/8"; L:65 mm; Recommended tightening torque for set screw:3.7 Nm; J:50.8 mm; H1:9 mm; N:M8; C0:6.65 kN; A1:19 mm; Z:15.9 mm;