Komatsu SUSPENSION ASCN-208634 SUSPENSION	Bearing Used:Deep Groove Ball Bea; Bearing Material:Stainless Steel; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Holder Surface Treatment:Not Provided; Seals:ZZ (Double Shield); Flange O.D. H(φ):48; Width T(mm):11;
Komatsu SUSPENSION 14X-54-00020 SUSPENSION	A:31 mm; S:18.2 mm; e:10 mm; A1:8 mm; B1:48.3 mm; C:19.5 kN; Dz:70 mm; H3:80; T max.:100 °C; C0:11.2 kN;
Komatsu SUSPENSION AS179109 SUSPENSION	Bearing Used:Deep Groove Ball Bea; Bearing Material:Stainless Steel; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Holder Surface Treatment:Not Provided; Seals:ZZ (Double Shield); Flange O.D. H(φ):48; Width T(mm):11;
Komatsu SUSPENSION GJ1097995 SUSPENSION	ra max:2 mm; Fatigue limit load, Cu:1.75 kN; d:50 mm; Da max:101 mm; Dynamic load, C:62 kN; B:27 mm; Characteristic rolling element frequency, BSF:4.07 Hz; D:110 mm; Mass:1.07 kg; Static load, C0:38.5 kN;
Komatsu SUSPENSION 14U-54-00050 SUSPENSION	Max operating temperature, Tmax:200 °C; Da max:189 mm; B:62 mm; Mass:7.76 kg; Radial clearance class:C3; e:0.28; d:120 mm; Nlim:3,200 rpm; Characteristic outer ring frequency, BPF0:9.14 Hz; da min:131 mm;
Komatsu SUSPENSION AS203538 SUSPENSION	s1:23 mm; Z:14.3 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:PE203N-; T min.:-20 °C; S:6.5 mm; Weight:0.44 kg; H1:10 mm; N:11mm; T max.:100 °C;
Komatsu SUSPENSION 22L-57-18110 SUSPENSION	db - Cone Backface Backing Diameter:11.65 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:46900 lbf; B - Cone Width:2.9375 in; Design Units:Imperial; Cone Part Number:DX991555; a - Effective Center Location4:-0.26 in; Cage Type:Stamped Steel; d:10.6250 in; Aa - Cage-Cone Backface Clearance:0.3 in; R - Cone Backface To Clear Radius3:0.25 in;
Komatsu SUSPENSION 124-54-53411 SUSPENSION	Thickness, Height Indication:T Selection, h Confi; Width T(mm):25 ～ 40; Lateral Width L(mm):60; Number of Bearings:Double; Shape:T-Shaped; Bearing I.D. d(mm):12; Housing Material:1045 Carbon Steel; Bearing Retained:No; C Chamfered:Provided; Height H(mm):20 ～ 40;