Komatsu SUSPENSION 8240-54-4782 CATWALK	db - Cone Backface Backing Diameter:11.65 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:46900 lbf; B - Cone Width:2.9375 in; Design Units:Imperial; Cone Part Number:DX991555; a - Effective Center Location4:-0.26 in; Cage Type:Stamped Steel; d:10.6250 in; Aa - Cage-Cone Backface Clearance:0.3 in; R - Cone Backface To Clear Radius3:0.25 in;
Komatsu SUSPENSION 421-57-31560 SUSPENSION	Max operating temperature, Tmax:200 °C; Da max:189 mm; B:62 mm; Mass:7.76 kg; Radial clearance class:C3; e:0.28; d:120 mm; Nlim:3,200 rpm; Characteristic outer ring frequency, BPF0:9.14 Hz; da min:131 mm;
Komatsu SUSPENSION GJ1097995 SUSPENSION	s1:23 mm; Z:14.3 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:PE203N-; T min.:-20 °C; S:6.5 mm; Weight:0.44 kg; H1:10 mm; N:11mm; T max.:100 °C;
Komatsu SUSPENSION 22M-57-21470 SUSPENSION	Characteristic inner ring frequency, BPFI:4.37 Hz; Brand:NTN; ra max:0.6 mm; da max:23 mm; Static load, C0:4.6 kN; d:17 mm; Radial clearance class:C3; Da max:36 mm; f0:12.8; Max operating temperature, Tmax:110 °C;
Komatsu SUSPENSION AS200067 SUSPENSION	Shape:Flange Type; Bearing Retained:No; Number of Bearings:Double; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Bearing Part Number:6000;
Komatsu SUSPENSION 14X-54-00020 SUSPENSION	Bearing Used:Deep Groove Ball Bea; Bearing Material:Stainless Steel; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Holder Surface Treatment:Not Provided; Seals:ZZ (Double Shield); Flange O.D. H(φ):48; Width T(mm):11;
Komatsu SUSPENSION ASCN-208634 SUSPENSION	Bearing Used:Deep Groove Ball Bea; Bearing Material:Stainless Steel; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Holder Surface Treatment:Not Provided; Seals:ZZ (Double Shield); Flange O.D. H(φ):48; Width T(mm):11;
Komatsu SUSPENSION 14X-54-00021 SUSPENSION	Max operating temperature, Tmax:200 °C; Da max:189 mm; B:62 mm; Mass:7.76 kg; Radial clearance class:C3; e:0.28; d:120 mm; Nlim:3,200 rpm; Characteristic outer ring frequency, BPF0:9.14 Hz; da min:131 mm;