Komatsu SUSPENSION GJ1097995 SUSPENSION	ra max:2 mm; Fatigue limit load, Cu:1.75 kN; d:50 mm; Da max:101 mm; Dynamic load, C:62 kN; B:27 mm; Characteristic rolling element frequency, BSF:4.07 Hz; D:110 mm; Mass:1.07 kg; Static load, C0:38.5 kN;
Komatsu SUSPENSION GJ1241742 SUSPENSION	Bearing Part Number:6205; Housing Material:1045 Carbon Steel; RoHS:6; Type:Bearings with Housin; Days to Ship:8 Days; Lateral Width L(mm):102; C Chamfered:Not Provided; Seals:VV (Non-Contact Rubb; Height H(mm):40 ～ 80; Bearing Material:[Steel] Steel;
Komatsu SUSPENSION 22J-57-1A500 SUSPENSION	s1:23 mm; Z:14.3 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:PE203N-; T min.:-20 °C; S:6.5 mm; Weight:0.44 kg; H1:10 mm; N:11mm; T max.:100 °C;
Komatsu SUSPENSION 421-57-31560 SUSPENSION	Bearing Used:Deep Groove Ball Bea; Bearing Material:Stainless Steel; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Holder Surface Treatment:Not Provided; Seals:ZZ (Double Shield); Flange O.D. H(φ):48; Width T(mm):11;
Komatsu SUSPENSION 8240-54-4782 CATWALK	db - Cone Backface Backing Diameter:11.65 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:46900 lbf; B - Cone Width:2.9375 in; Design Units:Imperial; Cone Part Number:DX991555; a - Effective Center Location4:-0.26 in; Cage Type:Stamped Steel; d:10.6250 in; Aa - Cage-Cone Backface Clearance:0.3 in; R - Cone Backface To Clear Radius3:0.25 in;
Komatsu SUSPENSION 8240-54-4783 CATWALK	ra max:2 mm; Fatigue limit load, Cu:1.75 kN; d:50 mm; Da max:101 mm; Dynamic load, C:62 kN; B:27 mm; Characteristic rolling element frequency, BSF:4.07 Hz; D:110 mm; Mass:1.07 kg; Static load, C0:38.5 kN;
Komatsu SUSPENSION AS200067 SUSPENSION	db - Cone Backface Backing Diameter:11.65 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:46900 lbf; B - Cone Width:2.9375 in; Design Units:Imperial; Cone Part Number:DX991555; a - Effective Center Location4:-0.26 in; Cage Type:Stamped Steel; d:10.6250 in; Aa - Cage-Cone Backface Clearance:0.3 in; R - Cone Backface To Clear Radius3:0.25 in;
Komatsu SUSPENSION AS193697 SUSPENSION	s1:23 mm; Z:14.3 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:PE203N-; T min.:-20 °C; S:6.5 mm; Weight:0.44 kg; H1:10 mm; N:11mm; T max.:100 °C;