Komatsu WORM 3FD-51-38110KF CANVAS	Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Flange Shape:Compact Type; Type:Bearings with Housin; Seals:DD (Contact Rubber S; Flange O.D. H(φ):64; RoHS:6;
Komatsu WORM 23A-70-16161 WORM	Flange Shape:Round Type; Days to Ship:7 Days; Bearing Part Number:6800; Seals:DD (Contact Rubber S; RoHS:6; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Clear Anodize; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea;
Komatsu WORM 417-15-13511 WORM	Cup Part Number:17830; Cg - Geometry Factor:0.077; D:3.1250 in; Db - Cup Backface Backing Diameter:2.8 in; r - Cup Backface To Clear Radius1:0.08 in; Series:17800; Design Units:Imperial; e - ISO Factor2:0.37; C - Cup Width:0.6250 in; Y - ISO Factor3:1.64;
Komatsu WORM 238-70-16141 WORM	Types:16**/6*** series; Grease symbol:/2AS; Max. Allowed rpm(rpm):5100; Basic Dynamic Load Rating(N):62000; B:24; Rolling Element Material:Steel; Days to Ship:9 Days or more; Type:Ball; Retainer Type:Punching; Seal, Shield Symbols:ZZ;
Komatsu WORM 201-957-4480 SHEAVE	Characteristic rolling element frequency, BSF:6.68 Hz; Characteristic cage frequency, FTF:0.43 Hz; b:7.9 mm; Dynamic load, C:267 kN; Characteristic outer ring frequency, BPF0:7.7 Hz; ra max:2 mm; Number of lubrication holes:3; D:140 mm; Fatigue limit load, Cu:32.5 kN; e:0.22;
Komatsu WORM 417-17-35180 WORM	Cup Part Number:17830; Cg - Geometry Factor:0.077; D:3.1250 in; Db - Cup Backface Backing Diameter:2.8 in; r - Cup Backface To Clear Radius1:0.08 in; Series:17800; Design Units:Imperial; e - ISO Factor2:0.37; C - Cup Width:0.6250 in; Y - ISO Factor3:1.64;
Komatsu WORM 203-957-3810 SHEAVE	Cup Part Number:17830; Cg - Geometry Factor:0.077; D:3.1250 in; Db - Cup Backface Backing Diameter:2.8 in; r - Cup Backface To Clear Radius1:0.08 in; Series:17800; Design Units:Imperial; e - ISO Factor2:0.37; C - Cup Width:0.6250 in; Y - ISO Factor3:1.64;
Komatsu WORM 207-957-2120 SHEAVE	s1:24.6 mm; A2:54.2 mm; C:31.85 kN; Weight:1.84 kg; Recommended tightening torque for set screw:8 Nm; e:24 mm; C0:20.8 kN; S:19 mm; B:49.2 mm; L:111 mm;