| Komatsu CONDENSER 428-13-11140 Maintainer Original import | N:14mm; H2:106.4 mm; C0:20.8 kN; Designation of bearing:UC209-26G2L3; N1:24 mm; A:54 mm; C:31.85 kN; d:41.28 mm; Weight:2.26 kg; Dz:95 mm; |
| Komatsu CONDENSER 21P-979-K440 Maintainer Original import | r1a max:0.3 mm; Characteristic cage frequency, FTF:0.43 Hz; Fatigue limit load, Cu:0.03 kN; Axial rigidity:37 N/µm; Nlim (oil):122,000 rpm; ra max:0.3 mm; D6:14.5 mm; B:6 mm; D2:18.95 mm; db min:12.5 mm; |
| Komatsu CONDENSER 19M-22-11431 Maintainer Original import | Shape:Flanged Pilot Type; Holder Surface Treatment:Black Oxide Coating; Type:Bearings with Housin; RoHS:6; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Flange O.D. H(φ):50; Housing Material:1045 Carbon Steel; Days to Ship:7 Days; |
| Komatsu CONDENSER YM129136-13510 Maintainer Original import | N:14mm; H2:106.4 mm; C0:20.8 kN; Designation of bearing:UC209-26G2L3; N1:24 mm; A:54 mm; C:31.85 kN; d:41.28 mm; Weight:2.26 kg; Dz:95 mm; |
| Komatsu CONDENSER 566-50-11133 Maintainer Original import | Aa - Cage-Cone Backface Clearance:14.7 mm; B - Cone Width:80.569 mm; Cage Type:Pin-Type; da - Cone Frontface Backing Diameter:309.12 mm; Cone Part Number:EE921124; Series:920000; r - Cup Backface To Clear Radius2:3.30 mm; a - Effective Center Location3:-13.5 mm; Cup Part Number:921875; Da - Cup Frontface Backing Diameter:442.98 mm; |
| Komatsu CONDENSER 17A-43-11191 Maintainer Original import | Brand:NTN; Static load, C0:3.6 kN; Nlim (grease):15,000 rpm; B:11 mm; Dynamic load, C:7.75 kN; Da max:31 mm; da max:20 mm; Characteristic outer ring frequency, BPF0:2.61 Hz; Radial clearance class:C3; da min:19 mm; |
| Komatsu CONDENSER 56D-33-11330 Maintainer Original import | B:29 mm; Weight:1.8 kg; A1:28 mm; B1:46 mm; Designation of housing:PA208-; d:35 mm; d1:58 mm; J:84 mm; H1:13 mm; T max.:100 °C; |
| Komatsu CONDENSER 427-46-12270 Maintainer Original import | C0:29.2 kN; T max.:100 °C; B:45.3 mm; A1:13 mm; Designation of housing:FC211N-; H3:125; S:11.8 mm; e:13 mm; J:150 mm; Recommended tightening torque for set screw:8 Nm; |