| Komatsu BRAKE 792-840-2500 INSTALLER Original import | Nlim (grease):2,100 rpm; B:41.28 mm; Max operating temperature, Tmax:120 °C; Y0:0.7; d1:133.5 mm; Dynamic load, C:222 kN; Brand:NTN; ra max:3.5 mm; Fatigue limit load, Cu:38.1 kN; Characteristic inner ring frequency, BPFI:12.74 Hz; |
| Komatsu BRAKE 792-840-3310 INSTALLER Original import | r1a max:1 mm; Characteristic inner ring frequency, BPFI:8.27 Hz; da min:46.5 mm; Brand:NTN; B:18 mm; ra max:1 mm; db min:52 mm; E:71.5 mm; Fatigue limit load, Cu:6.8 kN; Min operating temperature, Tmin:-20 °C; |
| Komatsu BRAKE 195-03-66550 BRAKE Original import | Holder Surface Treatment:Clear Anodize; Bearing Material:Steel; Holder Width(inch):ZZ (Double Shield); Days to Ship:6 Days; Bearing Retained:Yes (with retaining; Width T(mm):12; Number of Bearings:Single; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; |
| Komatsu BRAKE 198-03-71360 BRAKE Original import | Housing Material:[Aluminum Alloy] 201; Shape:Flanged Pilot Type; Number of Bearings:Double; Bearing Retained:No; Bearing I.D. d(mm):20; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Type:Bearings with Housin; |
| Komatsu BRAKE 17M-03-44161 BRAKE Original import | Z:19 mm; d:28.58 mm; A:50 mm; T max.:100 °C; T min.:-40 °C; L1:56 mm; Weight:1.68 kg; B:30 mm; Designation of housing:PH206N-; Recommended tightening torque for set screw:3.7 Nm; |
| Komatsu BRAKE 154-03-31590 BRAKE Original import | Nlim (grease):2,100 rpm; B:41.28 mm; Max operating temperature, Tmax:120 °C; Y0:0.7; d1:133.5 mm; Dynamic load, C:222 kN; Brand:NTN; ra max:3.5 mm; Fatigue limit load, Cu:38.1 kN; Characteristic inner ring frequency, BPFI:12.74 Hz; |
| Komatsu BRAKE 3FE-36-36130SGKF BRAKE PEDAL Original import | Ce - Dynamic Radial Rating1:7700 N; Bearing Width:9 mm; C0 - Static Radial Rating:4360 N; Ball Type:STEEL; D:37 mm; Da - Outer Ring Backing Diameter:33.700 mm; Contact Angle:25 º; Limiting Speed (Grease):37900 rpm; Bearing Weight:0.04 Kg; Design Units:METRIC; |
| Komatsu BRAKE 17A-03-12321 BRAKE Original import | Cg - Geometry Factor:0.109; Da - Cup Frontface Backing Diameter:4.18 in; Y - ISO Factor3:1.49; Cup Part Number:3920; Design Units:Imperial; r - Cup Backface To Clear Radius1:0.130 in; Db - Cup Backface Backing Diameter:3.90 in; D:4.4375 in; e - ISO Factor2:0.4; C - Cup Width:0.9375 in; |