| Komatsu BRAKE 198-03-51850 BRAKE Original import | r1a max:1 mm; Characteristic inner ring frequency, BPFI:8.27 Hz; da min:46.5 mm; Brand:NTN; B:18 mm; ra max:1 mm; db min:52 mm; E:71.5 mm; Fatigue limit load, Cu:6.8 kN; Min operating temperature, Tmin:-20 °C; |
| Komatsu BRAKE 209-03-61170 BRAKE Original import | Housing Material:[Aluminum Alloy] 201; Shape:Flanged Pilot Type; Number of Bearings:Double; Bearing Retained:No; Bearing I.D. d(mm):20; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Type:Bearings with Housin; |
| Komatsu BRAKE 154-03-31590 BRAKE Original import | Nlim (grease):2,100 rpm; B:41.28 mm; Max operating temperature, Tmax:120 °C; Y0:0.7; d1:133.5 mm; Dynamic load, C:222 kN; Brand:NTN; ra max:3.5 mm; Fatigue limit load, Cu:38.1 kN; Characteristic inner ring frequency, BPFI:12.74 Hz; |
| Komatsu BRAKE 195-03-63981 BRAKE Original import | Seals:VV (Non-Contact Rubb; Bearing Retained:No; Flange Shape:Square Type; Shape:Flanged Pilot Type; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Width T(mm):25; |
| Komatsu BRAKE MY881-8095-00KF BOOSTER,BRAKE Original import | Ce - Dynamic Radial Rating1:7700 N; Bearing Width:9 mm; C0 - Static Radial Rating:4360 N; Ball Type:STEEL; D:37 mm; Da - Outer Ring Backing Diameter:33.700 mm; Contact Angle:25 º; Limiting Speed (Grease):37900 rpm; Bearing Weight:0.04 Kg; Design Units:METRIC; |
| Komatsu BRAKE 791-130-2010 INSTALLER Original import | J:70 mm; Designation of bearing:ES205G2T04; Recommended tightening torque for set screw:5.5 Nm; C:14 kN; d1:37.4 mm; B1:30.9 mm; C0:7.88 kN; T max.:100 °C; B:21.4 mm; L:95 mm; |
| Komatsu BRAKE 792-840-2300 INSTALLER Original import | Tapered Bore:N; r - Outer Ring To Clear Radius5:3.0 mm; da - Inner Ring Backing Diameter:221.000 mm; C - Dynamic Radial Rating1:1060000 N; C - Inner Ring Width:88.900 mm; B - Outer Ring Width:88.900 mm; Reference Thermal Speed Rating (Oil)2:1200; R - Inner Ring To Clear Radius4:3.0 mm; d:200 mm; Type:NU; |
| Komatsu BRAKE 209-03-61181 BRAKE Original import | Holder Surface Treatment:Clear Anodize; Bearing Material:Steel; Holder Width(inch):ZZ (Double Shield); Days to Ship:6 Days; Bearing Retained:Yes (with retaining; Width T(mm):12; Number of Bearings:Single; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; |