Komatsu BRAKE 567-34-71110 PARKING BRAKE Original import	Material:52100 Bearing Steel; Size Unit:Inch; RoHS:6; Diameter SD(Inch):15/64; Days to Ship:6 Days or more; Volume Discount:Available;
Komatsu BRAKE 17M-03-44210 BRAKE Original import	J:70 mm; Designation of bearing:ES205G2T04; Recommended tightening torque for set screw:5.5 Nm; C:14 kN; d1:37.4 mm; B1:30.9 mm; C0:7.88 kN; T max.:100 °C; B:21.4 mm; L:95 mm;
Komatsu BRAKE 195-03-65961 BRAKE Original import	Nlim (grease):2,100 rpm; B:41.28 mm; Max operating temperature, Tmax:120 °C; Y0:0.7; d1:133.5 mm; Dynamic load, C:222 kN; Brand:NTN; ra max:3.5 mm; Fatigue limit load, Cu:38.1 kN; Characteristic inner ring frequency, BPFI:12.74 Hz;
Komatsu BRAKE 17A-03-23160 BRAKE Original import	Seals:VV (Non-Contact Rubb; Bearing Retained:No; Flange Shape:Square Type; Shape:Flanged Pilot Type; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Width T(mm):25;
Komatsu BRAKE 56B-34-39100 PARKING BRAKE A Original import	Holder Surface Treatment:Clear Anodize; Bearing Material:Steel; Holder Width(inch):ZZ (Double Shield); Days to Ship:6 Days; Bearing Retained:Yes (with retaining; Width T(mm):12; Number of Bearings:Single; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea;
Komatsu BRAKE 198-03-71360 BRAKE Original import	Cg - Geometry Factor:0.109; Da - Cup Frontface Backing Diameter:4.18 in; Y - ISO Factor3:1.49; Cup Part Number:3920; Design Units:Imperial; r - Cup Backface To Clear Radius1:0.130 in; Db - Cup Backface Backing Diameter:3.90 in; D:4.4375 in; e - ISO Factor2:0.4; C - Cup Width:0.9375 in;
Komatsu BRAKE 198-03-71920 BRAKE Original import	Cg - Geometry Factor:0.109; Da - Cup Frontface Backing Diameter:4.18 in; Y - ISO Factor3:1.49; Cup Part Number:3920; Design Units:Imperial; r - Cup Backface To Clear Radius1:0.130 in; Db - Cup Backface Backing Diameter:3.90 in; D:4.4375 in; e - ISO Factor2:0.4; C - Cup Width:0.9375 in;
Komatsu BRAKE 21T-03-71390 BRAKE Original import	Z:19 mm; d:28.58 mm; A:50 mm; T max.:100 °C; T min.:-40 °C; L1:56 mm; Weight:1.68 kg; B:30 mm; Designation of housing:PH206N-; Recommended tightening torque for set screw:3.7 Nm;