Komatsu HEATER 6754-81-5120 HEATER Original import	s1:33.4 mm; H:54 mm; N1:29 mm; T max.:200 °C; B1:43.7 mm; A:48 mm; L1:54.5 mm; A1:32 mm; H1:21.5 mm; Weight:2.19 kg;
Komatsu HEATER 600-815-7950 HEATER Original import	Cg - Geometry Factor8:0.1059; R - Inner Ring To Clear Radius1:2.500 mm; e - ISO Factor3:0.23; Bore Taper:1/12; Y1 - ISO Factor5:4.34; C0 - Static Radial Rating:2140000 N; Cage Material:Brass; Y0 - ISO Factor4:2.91; da - Inner Ring Backing Diameter:267.000 mm; Bearing Weight:33 Kg;
Komatsu HEATER 3EC-57-62210KF HEATER Original import	ra max:1 mm; Dynamic load, C:12.9 kN; Radial clearance class:C3; Static load, C0:6.8 kN; rs min:1 mm; Nlim (grease):14,000 rpm; Brand:NTN; f0:13.5; da min:27 mm; Fatigue limit load, Cu:0.31 kN;
Komatsu HEATER 600-815-9370 HEATER Original import	Cg - Geometry Factor8:0.1059; R - Inner Ring To Clear Radius1:2.500 mm; e - ISO Factor3:0.23; Bore Taper:1/12; Y1 - ISO Factor5:4.34; C0 - Static Radial Rating:2140000 N; Cage Material:Brass; Y0 - ISO Factor4:2.91; da - Inner Ring Backing Diameter:267.000 mm; Bearing Weight:33 Kg;
Komatsu HEATER 600-815-9650 HEATER Original import	s1:33.4 mm; H:54 mm; N1:29 mm; T max.:200 °C; B1:43.7 mm; A:48 mm; L1:54.5 mm; A1:32 mm; H1:21.5 mm; Weight:2.19 kg;
Komatsu HEATER 600-815-9140 HEATER Original import	Ab - Cage-Cone Frontface Clearance:6.3 mm; G1 - Heat Generation Factor (Roller-Raceway):692.3; d:169.984 mm; Cg - Geometry Factor:0.129; K - Factor7:1.25; Cage Type:Stamped Steel; C0 - Static Radial Rating:242000 lbf; B - Cone Width:63.5 mm; da - Cone Frontface Backing Diameter:188.98 mm; Db - Cup Backface Backing Diameter:259.08 mm;
Komatsu HEATER 600-815-2630 HEATER Original import	Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Flange O.D. H(φ):77; Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; Type:Bearings with Housin; Flange Shape:Compact Type;
Komatsu HEATER 6754-81-5120 HEATER Original import	Series:LL639200; Cg - Geometry Factor:0.133; Cup Part Number:LL639210; Design Units:Imperial; r - Cup Backface To Clear Radius1:0.06 in; e - ISO Factor2:0.42; C - Cup Width:0.6875 in; D:9.5000 in; Db - Cup Backface Backing Diameter:9.13 in; Y - ISO Factor3:1.44;