| Komatsu HEATER 600-815-8130 HEATER Original import | Cg - Geometry Factor8:0.1059; R - Inner Ring To Clear Radius1:2.500 mm; e - ISO Factor3:0.23; Bore Taper:1/12; Y1 - ISO Factor5:4.34; C0 - Static Radial Rating:2140000 N; Cage Material:Brass; Y0 - ISO Factor4:2.91; da - Inner Ring Backing Diameter:267.000 mm; Bearing Weight:33 Kg; |
| Komatsu HEATER 600-815-8470 HEATER Original import | Characteristic inner ring frequency, BPFI:9.8 Hz; d1:46 mm; Y0:0.94; Brand:NTN; d:25.4 mm; Inventory:0.0; Dynamic load, C:46.5 kN; B:20.64 mm; Min operating temperature, Tmin:-40 °C; Weight / Kilogram:0; |
| Komatsu HEATER 6742-01-5197 HEATER Original import | Oil Lubrication - B/C/O Seal:900 rpm; Float:0.083 in; Dimension D:6.63 in; UPC Code:0883450042505; Locking Style:Single Concentric; Shaft Size :4 in; Eng Internal Radial Clearance - Max:0.0047; Dimension RA:0.25 in; Dimension H:1.13 in; Full Timken Part Number:99999B; |
| Komatsu HEATER 6631-84-2823 HEATER Original import | N:18mm; S:14.9 mm; A1:50.8 mm; Weight:5.32 kg; Recommended tightening torque for set screw:22 Nm; Designation of bearing:US212G2T04; C0:32.8 kN; d:60 mm; A:79.4 mm; Designation of closed end cover:SCC212; |
| Komatsu HEATER 17A-06-23310 HEATER Original import | ra max:1 mm; Dynamic load, C:12.9 kN; Radial clearance class:C3; Static load, C0:6.8 kN; rs min:1 mm; Nlim (grease):14,000 rpm; Brand:NTN; f0:13.5; da min:27 mm; Fatigue limit load, Cu:0.31 kN; |
| Komatsu HEATER 600-816-3140 HEATER Original import | Characteristic inner ring frequency, BPFI:9.8 Hz; d1:46 mm; Y0:0.94; Brand:NTN; d:25.4 mm; Inventory:0.0; Dynamic load, C:46.5 kN; B:20.64 mm; Min operating temperature, Tmin:-40 °C; Weight / Kilogram:0; |
| Komatsu HEATER 56C-84-17210 HEATER Original import | s1:33.4 mm; H:54 mm; N1:29 mm; T max.:200 °C; B1:43.7 mm; A:48 mm; L1:54.5 mm; A1:32 mm; H1:21.5 mm; Weight:2.19 kg; |
| Komatsu HEATER ND116420-6830 HEATER Original import | Y - ISO Factor1:1.8; C - Double Cup Width:3.25 in; Da - Cup Frontface Backing Diameter:8.43 in; Design Units:Imperial; e - ISO Factor4:0.33; Y1 - ISO Factor5:2.03; D:8.7500 in; Cg - Geometry Factor7:0.13; Y2 - ISO Factor6:3.02; r - Cup Frontface To Clear Radius2:0.03 in; |