| Komatsu HEATER 600-815-9860 HEATER Original import | Series:LL639200; Cg - Geometry Factor:0.133; Cup Part Number:LL639210; Design Units:Imperial; r - Cup Backface To Clear Radius1:0.06 in; e - ISO Factor2:0.42; C - Cup Width:0.6875 in; D:9.5000 in; Db - Cup Backface Backing Diameter:9.13 in; Y - ISO Factor3:1.44; |
| Komatsu HEATER 600-815-8130 HEATER Original import | Cg - Geometry Factor8:0.1059; R - Inner Ring To Clear Radius1:2.500 mm; e - ISO Factor3:0.23; Bore Taper:1/12; Y1 - ISO Factor5:4.34; C0 - Static Radial Rating:2140000 N; Cage Material:Brass; Y0 - ISO Factor4:2.91; da - Inner Ring Backing Diameter:267.000 mm; Bearing Weight:33 Kg; |
| Komatsu HEATER 600-815-9760 HEATER Original import | Y - ISO Factor1:1.8; C - Double Cup Width:3.25 in; Da - Cup Frontface Backing Diameter:8.43 in; Design Units:Imperial; e - ISO Factor4:0.33; Y1 - ISO Factor5:2.03; D:8.7500 in; Cg - Geometry Factor7:0.13; Y2 - ISO Factor6:3.02; r - Cup Frontface To Clear Radius2:0.03 in; |
| Komatsu HEATER 600-815-2630 HEATER Original import | Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Flange O.D. H(φ):77; Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; Type:Bearings with Housin; Flange Shape:Compact Type; |
| Komatsu HEATER 17A-06-23310 HEATER Original import | ra max:1 mm; Dynamic load, C:12.9 kN; Radial clearance class:C3; Static load, C0:6.8 kN; rs min:1 mm; Nlim (grease):14,000 rpm; Brand:NTN; f0:13.5; da min:27 mm; Fatigue limit load, Cu:0.31 kN; |
| Komatsu HEATER 3EC-57-62210KF HEATER Original import | ra max:1 mm; Dynamic load, C:12.9 kN; Radial clearance class:C3; Static load, C0:6.8 kN; rs min:1 mm; Nlim (grease):14,000 rpm; Brand:NTN; f0:13.5; da min:27 mm; Fatigue limit load, Cu:0.31 kN; |
| Komatsu HEATER AN51710-10100 HEATER Original import | da max:73.4 mm; rs min:1.5 mm; Characteristic cage frequency, FTF:0.41 Hz; Nref:6,800 rpm; Da max:102 mm; Characteristic rolling element frequency, BSF:5.17 Hz; d1:73.4 mm; Static load, C0:36 kN; Characteristic outer ring frequency, BPF0:4.07 Hz; f0:14.3; |
| Komatsu HEATER 600-815-2640 HEATER Original import | N:18mm; S:14.9 mm; A1:50.8 mm; Weight:5.32 kg; Recommended tightening torque for set screw:22 Nm; Designation of bearing:US212G2T04; C0:32.8 kN; d:60 mm; A:79.4 mm; Designation of closed end cover:SCC212; |