| Komatsu HEATER 600-815-2640 HEATER Original import | N:18mm; S:14.9 mm; A1:50.8 mm; Weight:5.32 kg; Recommended tightening torque for set screw:22 Nm; Designation of bearing:US212G2T04; C0:32.8 kN; d:60 mm; A:79.4 mm; Designation of closed end cover:SCC212; |
| Komatsu HEATER 3EC-94-31110KF HEATER Original import | Type:Bearings with Housin; Flange Shape:Square Type; Bearing Retained:No; Days to Ship:7 Days; Housing Material:[Aluminum Alloy] 201; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Seals:DD (Contact Rubber S; |
| Komatsu HEATER 600-815-8130 HEATER Original import | da max:73.4 mm; rs min:1.5 mm; Characteristic cage frequency, FTF:0.41 Hz; Nref:6,800 rpm; Da max:102 mm; Characteristic rolling element frequency, BSF:5.17 Hz; d1:73.4 mm; Static load, C0:36 kN; Characteristic outer ring frequency, BPF0:4.07 Hz; f0:14.3; |
| Komatsu HEATER 600-815-7950 HEATER Original import | Cg - Geometry Factor8:0.1059; R - Inner Ring To Clear Radius1:2.500 mm; e - ISO Factor3:0.23; Bore Taper:1/12; Y1 - ISO Factor5:4.34; C0 - Static Radial Rating:2140000 N; Cage Material:Brass; Y0 - ISO Factor4:2.91; da - Inner Ring Backing Diameter:267.000 mm; Bearing Weight:33 Kg; |
| Komatsu HEATER 600-815-9650 HEATER Original import | s1:33.4 mm; H:54 mm; N1:29 mm; T max.:200 °C; B1:43.7 mm; A:48 mm; L1:54.5 mm; A1:32 mm; H1:21.5 mm; Weight:2.19 kg; |
| Komatsu HEATER AN51710-10080 HEATER Original import | Ab - Cage-Cone Frontface Clearance:6.3 mm; G1 - Heat Generation Factor (Roller-Raceway):692.3; d:169.984 mm; Cg - Geometry Factor:0.129; K - Factor7:1.25; Cage Type:Stamped Steel; C0 - Static Radial Rating:242000 lbf; B - Cone Width:63.5 mm; da - Cone Frontface Backing Diameter:188.98 mm; Db - Cup Backface Backing Diameter:259.08 mm; |
| Komatsu HEATER 3EC-57-72210KF HEATER Original import | ra max:1 mm; Dynamic load, C:12.9 kN; Radial clearance class:C3; Static load, C0:6.8 kN; rs min:1 mm; Nlim (grease):14,000 rpm; Brand:NTN; f0:13.5; da min:27 mm; Fatigue limit load, Cu:0.31 kN; |
| Komatsu HEATER 600-815-8130 HEATER Original import | Cg - Geometry Factor8:0.1059; R - Inner Ring To Clear Radius1:2.500 mm; e - ISO Factor3:0.23; Bore Taper:1/12; Y1 - ISO Factor5:4.34; C0 - Static Radial Rating:2140000 N; Cage Material:Brass; Y0 - ISO Factor4:2.91; da - Inner Ring Backing Diameter:267.000 mm; Bearing Weight:33 Kg; |