Komatsu HEATER AN51710-10080 HEATER Original import	Ab - Cage-Cone Frontface Clearance:6.3 mm; G1 - Heat Generation Factor (Roller-Raceway):692.3; d:169.984 mm; Cg - Geometry Factor:0.129; K - Factor7:1.25; Cage Type:Stamped Steel; C0 - Static Radial Rating:242000 lbf; B - Cone Width:63.5 mm; da - Cone Frontface Backing Diameter:188.98 mm; Db - Cup Backface Backing Diameter:259.08 mm;
Komatsu HEATER 600-815-9330 HEATER Original import	Characteristic inner ring frequency, BPFI:9.8 Hz; d1:46 mm; Y0:0.94; Brand:NTN; d:25.4 mm; Inventory:0.0; Dynamic load, C:46.5 kN; B:20.64 mm; Min operating temperature, Tmin:-40 °C; Weight / Kilogram:0;
Komatsu HEATER 3EC-57-72210KF HEATER Original import	ra max:1 mm; Dynamic load, C:12.9 kN; Radial clearance class:C3; Static load, C0:6.8 kN; rs min:1 mm; Nlim (grease):14,000 rpm; Brand:NTN; f0:13.5; da min:27 mm; Fatigue limit load, Cu:0.31 kN;
Komatsu HEATER YM46150-504500 HEATER Original import	Cg - Geometry Factor8:0.1059; R - Inner Ring To Clear Radius1:2.500 mm; e - ISO Factor3:0.23; Bore Taper:1/12; Y1 - ISO Factor5:4.34; C0 - Static Radial Rating:2140000 N; Cage Material:Brass; Y0 - ISO Factor4:2.91; da - Inner Ring Backing Diameter:267.000 mm; Bearing Weight:33 Kg;
Komatsu HEATER 3EC-94-31110KF HEATER Original import	Type:Bearings with Housin; Flange Shape:Square Type; Bearing Retained:No; Days to Ship:7 Days; Housing Material:[Aluminum Alloy] 201; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Seals:DD (Contact Rubber S;
Komatsu HEATER 600-815-7950 HEATER Original import	Cg - Geometry Factor8:0.1059; R - Inner Ring To Clear Radius1:2.500 mm; e - ISO Factor3:0.23; Bore Taper:1/12; Y1 - ISO Factor5:4.34; C0 - Static Radial Rating:2140000 N; Cage Material:Brass; Y0 - ISO Factor4:2.91; da - Inner Ring Backing Diameter:267.000 mm; Bearing Weight:33 Kg;
Komatsu HEATER 600-815-2640 HEATER Original import	N:18mm; S:14.9 mm; A1:50.8 mm; Weight:5.32 kg; Recommended tightening torque for set screw:22 Nm; Designation of bearing:US212G2T04; C0:32.8 kN; d:60 mm; A:79.4 mm; Designation of closed end cover:SCC212;
Komatsu HEATER 600-815-6820 HEATER Original import	Y - ISO Factor1:1.8; C - Double Cup Width:3.25 in; Da - Cup Frontface Backing Diameter:8.43 in; Design Units:Imperial; e - ISO Factor4:0.33; Y1 - ISO Factor5:2.03; D:8.7500 in; Cg - Geometry Factor7:0.13; Y2 - ISO Factor6:3.02; r - Cup Frontface To Clear Radius2:0.03 in;